HP12×74 Pile Dimensions & Properties
HP Shapes (Bearing Piles) · HP12
HP12×74 is an AISC HP bearing-pile shape. It is 12.1 in (307.3 mm) deep and 12.2 in (309.9 mm) wide, with a 0.605 in (15.4 mm) web and 0.61 in (15.5 mm) flanges, and weighs 74 lb/ft (110.1 kg/m). Area 21.8 in² (14,064 mm²); Ix = 569 in⁴ (23,683.6 cm⁴), Iy = 186 in⁴ (7,741.9 cm⁴).
- dDepth
- 307.3 mm12.1 in12.1 in307.3 mm
- bfFlange width
- 309.9 mm12.2 in12.2 in309.9 mm
- twWeb thickness
- 15.4 mm0.605 in0.605 in15.4 mm
- tfFlange thickness
- 15.5 mm0.61 in0.61 in15.5 mm
Drawing
HP12×74 specifications
| dDepth | 12.1 in307.3 mm |
|---|---|
| bfFlange width | 12.2 in309.9 mm |
| twWeb thickness | 0.605 in15.4 mm |
| tfFlange thickness | 0.61 in15.5 mm |
| kDesign value | 1.31 in33.3 mm |
| kDetailing value | 1 1/2 in38.1 mm |
| k1Detailing value | 1 1/8 in28.6 mm |
| WWeight | 74 lb/ft110.1 kg/m |
| AArea | 21.8 in²14,064 mm² |
| IxMoment of inertia, strong axis | 569 in⁴23,683.6 cm⁴ |
| ZxPlastic modulus, strong axis | 105 in³1720.6 cm³ |
| SxSection modulus, strong axis | 93.8 in³1537.1 cm³ |
| rxRadius of gyration, strong axis | 5.11 in129.8 mm |
| IyMoment of inertia, weak axis | 186 in⁴7,741.9 cm⁴ |
| ZyPlastic modulus, weak axis | 46.6 in³763.6 cm³ |
| SySection modulus, weak axis | 30.4 in³498.2 cm³ |
| ryRadius of gyration, weak axis | 2.92 in74.2 mm |
| JTorsional constant | 2.98 in⁴124.04 cm⁴ |
| bf/2tfFlange slenderness | 10 |
| h/twWeb slenderness | 16.1 |
| Metric designation | HP310×110 |
Also known as
HP310×110
HP shapes of about the same weight in other sizes
All HP Shapes (Bearing Piles) sizes
Compare all 22 shapes in the HP Shapes (Bearing Piles) chart →
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.