HP14×73 Pile Dimensions & Properties

HP Shapes (Bearing Piles) · HP14

HP14×73 is an AISC HP bearing-pile shape. It is 13.6 in (345.4 mm) deep and 14.6 in (370.8 mm) wide, with a 0.505 in (12.8 mm) web and 0.505 in (12.8 mm) flanges, and weighs 73 lb/ft (108.6 kg/m). Area 21.4 in² (13,806 mm²); Ix = 729 in⁴ (30,343.3 cm⁴), Iy = 261 in⁴ (10,863.6 cm⁴).

dDepth
345.4 mm13.6 in13.6 in345.4 mm
bfFlange width
370.8 mm14.6 in14.6 in370.8 mm
twWeb thickness
12.8 mm0.505 in0.505 in12.8 mm
tfFlange thickness
12.8 mm0.505 in0.505 in12.8 mm

Drawing

370.8 mm14.6 in345.4 mm13.6 intf 12.8 mmtf 0.505 intw 12.8 mmtw 0.505 ink 30.2 mmk 1.19 in
Drawn to scale · Dimensions in mmDimensions in inches

HP14×73 specifications

dDepth13.6 in345.4 mm
bfFlange width14.6 in370.8 mm
twWeb thickness0.505 in12.8 mm
tfFlange thickness0.505 in12.8 mm
kDesign value1.19 in30.2 mm
kDetailing value1 3/4 in44.4 mm
k1Detailing value1 7/16 in36.5 mm
WWeight73 lb/ft108.6 kg/m
AArea21.4 in²13,806 mm²
IxMoment of inertia, strong axis729 in⁴30,343.3 cm⁴
ZxPlastic modulus, strong axis118 in³1933.7 cm³
SxSection modulus, strong axis107 in³1753.4 cm³
rxRadius of gyration, strong axis5.84 in148.3 mm
IyMoment of inertia, weak axis261 in⁴10,863.6 cm⁴
ZyPlastic modulus, weak axis54.6 in³894.7 cm³
SySection modulus, weak axis35.8 in³586.7 cm³
ryRadius of gyration, weak axis3.49 in88.6 mm
JTorsional constant2.01 in⁴83.66 cm⁴
bf/2tfFlange slenderness14.4
h/twWeb slenderness22.6
Metric designationHP360×108

Also known as

HP360×108

HP shapes of about the same weight in other sizes

All HP Shapes (Bearing Piles) sizes

Compare all 22 shapes in the HP Shapes (Bearing Piles) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.