HP16×183 Pile Dimensions & Properties
HP Shapes (Bearing Piles) · HP16
HP16×183 is an AISC HP bearing-pile shape. It is 16.5 in (419.1 mm) deep and 16.3 in (414.0 mm) wide, with a 1.13 in (28.7 mm) web and 1.13 in (28.7 mm) flanges, and weighs 183 lb/ft (272.3 kg/m). Area 54.1 in² (34,903 mm²); Ix = 2,510 in⁴ (104,474.1 cm⁴), Iy = 818 in⁴ (34,047.7 cm⁴).
- dDepth
- 419.1 mm16.5 in16.5 in419.1 mm
- bfFlange width
- 414.0 mm16.3 in16.3 in414.0 mm
- twWeb thickness
- 28.7 mm1.13 in1.13 in28.7 mm
- tfFlange thickness
- 28.7 mm1.13 in1.13 in28.7 mm
Drawing
HP16×183 specifications
| dDepth | 16.5 in419.1 mm |
|---|---|
| bfFlange width | 16.3 in414.0 mm |
| twWeb thickness | 1.13 in28.7 mm |
| tfFlange thickness | 1.13 in28.7 mm |
| kDesign value | 2.31 in58.7 mm |
| kDetailing value | 2 5/16 in58.7 mm |
| k1Detailing value | 1 3/4 in44.4 mm |
| WWeight | 183 lb/ft272.3 kg/m |
| AArea | 54.1 in²34,903 mm² |
| IxMoment of inertia, strong axis | 2,510 in⁴104,474.1 cm⁴ |
| ZxPlastic modulus, strong axis | 349 in³5719.1 cm³ |
| SxSection modulus, strong axis | 304 in³4981.7 cm³ |
| rxRadius of gyration, strong axis | 6.81 in173.0 mm |
| IyMoment of inertia, weak axis | 818 in⁴34,047.7 cm⁴ |
| ZyPlastic modulus, weak axis | 156 in³2556.4 cm³ |
| SySection modulus, weak axis | 100 in³1638.7 cm³ |
| ryRadius of gyration, weak axis | 3.89 in98.8 mm |
| JTorsional constant | 26.9 in⁴1119.66 cm⁴ |
| bf/2tfFlange slenderness | 7.21 |
| h/twWeb slenderness | 10.5 |
| Metric designation | HP410×272 |
Also known as
HP410×272
HP shapes of about the same weight in other sizes
All HP Shapes (Bearing Piles) sizes
Compare all 22 shapes in the HP Shapes (Bearing Piles) chart →
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.