HP18×181 Pile Dimensions & Properties
HP Shapes (Bearing Piles) · HP18
HP18×181 is an AISC HP bearing-pile shape. It is 18 in (457.2 mm) deep and 18 in (457.2 mm) wide, with a 1 in (25.4 mm) web and 1 in (25.4 mm) flanges, and weighs 181 lb/ft (269.4 kg/m). Area 53.2 in² (34,323 mm²); Ix = 3,020 in⁴ (125,701.9 cm⁴), Iy = 974 in⁴ (40,540.9 cm⁴).
- dDepth
- 457.2 mm18 in18 in457.2 mm
- bfFlange width
- 457.2 mm18 in18 in457.2 mm
- twWeb thickness
- 25.4 mm1 in1 in25.4 mm
- tfFlange thickness
- 25.4 mm1 in1 in25.4 mm
Drawing
HP18×181 specifications
| dDepth | 18 in457.2 mm |
|---|---|
| bfFlange width | 18 in457.2 mm |
| twWeb thickness | 1 in25.4 mm |
| tfFlange thickness | 1 in25.4 mm |
| kDesign value | 2.18 in55.4 mm |
| kDetailing value | 2 3/16 in55.6 mm |
| k1Detailing value | 1 11/16 in42.9 mm |
| WWeight | 181 lb/ft269.4 kg/m |
| AArea | 53.2 in²34,323 mm² |
| IxMoment of inertia, strong axis | 3,020 in⁴125,701.9 cm⁴ |
| ZxPlastic modulus, strong axis | 379 in³6210.7 cm³ |
| SxSection modulus, strong axis | 336 in³5506.1 cm³ |
| rxRadius of gyration, strong axis | 7.53 in191.3 mm |
| IyMoment of inertia, weak axis | 974 in⁴40,540.9 cm⁴ |
| ZyPlastic modulus, weak axis | 167 in³2736.6 cm³ |
| SySection modulus, weak axis | 108 in³1769.8 cm³ |
| ryRadius of gyration, weak axis | 4.28 in108.7 mm |
| JTorsional constant | 20.7 in⁴861.6 cm⁴ |
| bf/2tfFlange slenderness | 9 |
| h/twWeb slenderness | 13.6 |
| Metric designation | HP460×269 |
Also known as
HP460×269
HP shapes of about the same weight in other sizes
All HP Shapes (Bearing Piles) sizes
Compare all 22 shapes in the HP Shapes (Bearing Piles) chart →
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.