HP18×204 Pile Dimensions & Properties
HP Shapes (Bearing Piles) · HP18
HP18×204 is an AISC HP bearing-pile shape. It is 18.3 in (464.8 mm) deep and 18.1 in (459.7 mm) wide, with a 1.13 in (28.7 mm) web and 1.13 in (28.7 mm) flanges, and weighs 204 lb/ft (303.6 kg/m). Area 60.2 in² (38,839 mm²); Ix = 3,480 in⁴ (144,848.5 cm⁴), Iy = 1,120 in⁴ (46,617.9 cm⁴).
- dDepth
- 464.8 mm18.3 in18.3 in464.8 mm
- bfFlange width
- 459.7 mm18.1 in18.1 in459.7 mm
- twWeb thickness
- 28.7 mm1.13 in1.13 in28.7 mm
- tfFlange thickness
- 28.7 mm1.13 in1.13 in28.7 mm
Drawing
HP18×204 specifications
| dDepth | 18.3 in464.8 mm |
|---|---|
| bfFlange width | 18.1 in459.7 mm |
| twWeb thickness | 1.13 in28.7 mm |
| tfFlange thickness | 1.13 in28.7 mm |
| kDesign value | 2.31 in58.7 mm |
| kDetailing value | 2 5/16 in58.7 mm |
| k1Detailing value | 1 3/4 in44.4 mm |
| WWeight | 204 lb/ft303.6 kg/m |
| AArea | 60.2 in²38,839 mm² |
| IxMoment of inertia, strong axis | 3,480 in⁴144,848.5 cm⁴ |
| ZxPlastic modulus, strong axis | 433 in³7095.6 cm³ |
| SxSection modulus, strong axis | 380 in³6227.1 cm³ |
| rxRadius of gyration, strong axis | 7.6 in193.0 mm |
| IyMoment of inertia, weak axis | 1,120 in⁴46,617.9 cm⁴ |
| ZyPlastic modulus, weak axis | 191 in³3129.9 cm³ |
| SySection modulus, weak axis | 124 in³2032 cm³ |
| ryRadius of gyration, weak axis | 4.31 in109.5 mm |
| JTorsional constant | 29.5 in⁴1227.88 cm⁴ |
| bf/2tfFlange slenderness | 8.01 |
| h/twWeb slenderness | 12.1 |
| Metric designation | HP460×304 |
Also known as
HP460×304
All HP Shapes (Bearing Piles) sizes
Compare all 22 shapes in the HP Shapes (Bearing Piles) chart →
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.