1-1/2" Hex Bolt Head Size

Inch Hex Bolts

A 1-1/2" hex cap screw (ASME B18.2.1) takes a 2 1/4 in (57.2 mm) wrench. The head is 15/16 in (23.81 mm) high (basic) and up to 2.598 in (65.99 mm) across the corners. Threads: 6 TPI (4.233 mm) coarse (UNC) or 12 TPI (2.117 mm) fine (UNF).

FWidth across flats
57.2 mm2 1/4 in2 1/4 in57.2 mm
HHead height, cap screw (basic)
23.81 mm15/16 in15/16 in23.81 mm
GWidth across corners
65.99 mm2.598 in2.598 in65.99 mm
nCoarse thread (UNC)
4.233 mm6 TPI6 TPI4.233 mm

Drawing

G 65.99 mmG 2.598 in23.81 mm15/16 in1-1/2"
F 57.2 mmF 2 1/4 in
Hex cap screw, across-corners side viewDrawn to scale · Dimensions in mmDimensions in inches

1-1/2" specifications

dMajor diameter1 1/2 in38.10 mm
FWidth across flats2 1/4 in57.2 mm
GWidth across corners2.598 in65.99 mm
HHead height, cap screw (basic)15/16 in23.81 mm
Head height, hex bolt (basic)1 in25.40 mm
Across flats, heavy hex2 3/8 in60.3 mm
nCoarse thread (UNC)6 TPI4.233 mm
nFine thread (UNF)12 TPI2.117 mm

Also known as

1-1/2-61-1/2-12

1-1/2" in other charts

All Inch Hex Bolts sizes

Compare all 14 sizes in the Inch Hex Bolts chart →

Sources

  1. ASME B18.2.1-2012: Square, hex, heavy hex and askew head bolts and hex, heavy hex, hex flange, lobed head and lag screws (inch series)
  2. ASME B1.1: Unified inch screw threads (UN, UNR thread form)
  3. Brighton-Best: Hex head bolts / cap screws dimensional data
  4. AmesWeb: Hex cap screw dimensions (ASME B18.2.1)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.