1-3/8" Hex Bolt Head Size

Inch Hex Bolts

A 1-3/8" hex cap screw (ASME B18.2.1) takes a 2 1/16 in (52.4 mm) wrench. The head is 27/32 in (21.43 mm) high (basic) and up to 2.382 in (60.50 mm) across the corners. Threads: 6 TPI (4.233 mm) coarse (UNC) or 12 TPI (2.117 mm) fine (UNF).

FWidth across flats
52.4 mm2 1/16 in2 1/16 in52.4 mm
HHead height, cap screw (basic)
21.43 mm27/32 in27/32 in21.43 mm
GWidth across corners
60.50 mm2.382 in2.382 in60.50 mm
nCoarse thread (UNC)
4.233 mm6 TPI6 TPI4.233 mm

Drawing

G 60.50 mmG 2.382 in21.43 mm27/32 in1-3/8"
F 52.4 mmF 2 1/16 in
Hex cap screw, across-corners side viewDrawn to scale · Dimensions in mmDimensions in inches

1-3/8" specifications

dMajor diameter1 3/8 in34.93 mm
FWidth across flats2 1/16 in52.4 mm
GWidth across corners2.382 in60.50 mm
HHead height, cap screw (basic)27/32 in21.43 mm
Head height, hex bolt (basic)29/32 in23.02 mm
Across flats, heavy hex2 3/16 in55.6 mm
nCoarse thread (UNC)6 TPI4.233 mm
nFine thread (UNF)12 TPI2.117 mm

Also known as

1-3/8-61-3/8-12

1-3/8" in other charts

All Inch Hex Bolts sizes

Compare all 14 sizes in the Inch Hex Bolts chart →

Sources

  1. ASME B18.2.1-2012: Square, hex, heavy hex and askew head bolts and hex, heavy hex, hex flange, lobed head and lag screws (inch series)
  2. ASME B1.1: Unified inch screw threads (UN, UNR thread form)
  3. Brighton-Best: Hex head bolts / cap screws dimensional data
  4. AmesWeb: Hex cap screw dimensions (ASME B18.2.1)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.