1/2" Hex Bolt Head Size

Inch Hex Bolts

A 1/2" hex cap screw (ASME B18.2.1) takes a 3/4 in (19.0 mm) wrench. The head is 5/16 in (7.94 mm) high (basic) and up to 0.866 in (22.00 mm) across the corners. Threads: 13 TPI (1.954 mm) coarse (UNC) or 20 TPI (1.270 mm) fine (UNF).

FWidth across flats
19.0 mm3/4 in3/4 in19.0 mm
HHead height, cap screw (basic)
7.94 mm5/16 in5/16 in7.94 mm
GWidth across corners
22.00 mm0.866 in0.866 in22.00 mm
nCoarse thread (UNC)
1.954 mm13 TPI13 TPI1.954 mm

Drawing

G 22.00 mmG 0.866 in7.94 mm5/16 in1/2"
F 19.0 mmF 3/4 in
Hex cap screw, across-corners side viewDrawn to scale · Dimensions in mmDimensions in inches

1/2" specifications

dMajor diameter1/2 in12.70 mm
FWidth across flats3/4 in19.0 mm
GWidth across corners0.866 in22.00 mm
HHead height, cap screw (basic)5/16 in7.94 mm
Head height, hex bolt (basic)11/32 in8.73 mm
Across flats, heavy hex7/8 in22.2 mm
nCoarse thread (UNC)13 TPI1.954 mm
nFine thread (UNF)20 TPI1.270 mm

1/2 in: regular hex 3/4 in wrench, heavy hex 7/8 in.

Also known as

1/2-131/2-20

Wrench and socket for the 1/2"

1/2" in other charts

All Inch Hex Bolts sizes

Compare all 14 sizes in the Inch Hex Bolts chart →

Sources

  1. ASME B18.2.1-2012: Square, hex, heavy hex and askew head bolts and hex, heavy hex, hex flange, lobed head and lag screws (inch series)
  2. ASME B1.1: Unified inch screw threads (UN, UNR thread form)
  3. Brighton-Best: Hex head bolts / cap screws dimensional data
  4. AmesWeb: Hex cap screw dimensions (ASME B18.2.1)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.