1/2″ Thread: TPI, Tap Drill and Clearance Hole
UNC / UNF Threads
The 1/2″ unified thread has a major diameter of 0.5000 in (12.70 mm). Coarse thread (UNC): 13 TPI (1.954 mm), tap drill 27/64″. Fine thread (UNF): 20 TPI (1.270 mm), tap drill 29/64″. Clearance drills, basic pitch and minor diameters and the nearest metric sizes are below.
- dMajor diameter
- 12.70 mm0.5000 in0.5000 in12.70 mm
- UNC threads per inch
- 1.954 mm13 TPI13 TPI1.954 mm
- UNC tap drill
- 27/64″
- UNF threads per inch
- 1.270 mm20 TPI20 TPI1.270 mm
Drawing
1/2″ specifications
| dMajor diameter | 0.5000 in12.70 mm |
|---|---|
| UNC threads per inch | 13 TPI1.954 mm |
| UNC tap drill | 27/64″ |
| UNC tap drill (decimal) | 0.4219 in10.72 mm |
| UNF threads per inch | 20 TPI1.270 mm |
| UNF tap drill | 29/64″ |
| UNF tap drill (decimal) | 0.4531 in11.51 mm |
| UNEF threads per inch | 28 TPI0.907 mm |
| Clearance drill, close fit | 33/64″ |
| Clearance drill, close (decimal) | 0.5156 in13.10 mm |
| Clearance drill, free fit | 17/32″ |
| Clearance drill, free (decimal) | 0.5313 in13.50 mm |
| d₂Pitch diameter (basic) | 0.4500 in11.430 mm |
| D₁Minor diameter, nut (basic) | 0.4167 in10.584 mm |
1/2-13 UNC uses a 27/64″ tap drill. 1/2-20 UNF is the classic lug-nut thread on many older US cars and light trucks.
Also known as
1/2-131/2"-131/2-201/2"-20
Tap and clearance drills for 1/2″
Nearest metric thread sizes
All UNC / UNF Threads sizes
Sources
- ASME B1.1-2019: Unified inch screw threads (UN, UNR and UNJ thread forms)
- Machinery's Handbook, 31st ed.: Unified thread series and tap drill sizes
- Little Machine Shop: Tap and clearance drill sizes
- Starrett: Tap drill sizes, close and free fit clearance drills
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.