5/8" Hex Bolt Head Size

Inch Hex Bolts

A 5/8" hex cap screw (ASME B18.2.1) takes a 15/16 in (23.8 mm) wrench. The head is 25/64 in (9.92 mm) high (basic) and up to 1.083 in (27.51 mm) across the corners. Threads: 11 TPI (2.309 mm) coarse (UNC) or 18 TPI (1.411 mm) fine (UNF).

FWidth across flats
23.8 mm15/16 in15/16 in23.8 mm
HHead height, cap screw (basic)
9.92 mm25/64 in25/64 in9.92 mm
GWidth across corners
27.51 mm1.083 in1.083 in27.51 mm
nCoarse thread (UNC)
2.309 mm11 TPI11 TPI2.309 mm

Drawing

G 27.51 mmG 1.083 in9.92 mm25/64 in5/8"
F 23.8 mmF 15/16 in
Hex cap screw, across-corners side viewDrawn to scale · Dimensions in mmDimensions in inches

5/8" specifications

dMajor diameter5/8 in15.88 mm
FWidth across flats15/16 in23.8 mm
GWidth across corners1.083 in27.51 mm
HHead height, cap screw (basic)25/64 in9.92 mm
Head height, hex bolt (basic)27/64 in10.72 mm
Across flats, heavy hex1 1/16 in27.0 mm
nCoarse thread (UNC)11 TPI2.309 mm
nFine thread (UNF)18 TPI1.411 mm

Also known as

5/8-115/8-18

Wrench and socket for the 5/8"

5/8" in other charts

All Inch Hex Bolts sizes

Compare all 14 sizes in the Inch Hex Bolts chart →

Sources

  1. ASME B18.2.1-2012: Square, hex, heavy hex and askew head bolts and hex, heavy hex, hex flange, lobed head and lag screws (inch series)
  2. ASME B1.1: Unified inch screw threads (UN, UNR thread form)
  3. Brighton-Best: Hex head bolts / cap screws dimensional data
  4. AmesWeb: Hex cap screw dimensions (ASME B18.2.1)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.