5/8″ Thread: TPI, Tap Drill and Clearance Hole
UNC / UNF Threads
The 5/8″ unified thread has a major diameter of 0.6250 in (15.88 mm). Coarse thread (UNC): 11 TPI (2.309 mm), tap drill 17/32″. Fine thread (UNF): 18 TPI (1.411 mm), tap drill 37/64″. Clearance drills, basic pitch and minor diameters and the nearest metric sizes are below.
- dMajor diameter
- 15.88 mm0.6250 in0.6250 in15.88 mm
- UNC threads per inch
- 2.309 mm11 TPI11 TPI2.309 mm
- UNC tap drill
- 17/32″
- UNF threads per inch
- 1.411 mm18 TPI18 TPI1.411 mm
Drawing
5/8″ specifications
| dMajor diameter | 0.6250 in15.88 mm |
|---|---|
| UNC threads per inch | 11 TPI2.309 mm |
| UNC tap drill | 17/32″ |
| UNC tap drill (decimal) | 0.5313 in13.50 mm |
| UNF threads per inch | 18 TPI1.411 mm |
| UNF tap drill | 37/64″ |
| UNF tap drill (decimal) | 0.5781 in14.68 mm |
| UNEF threads per inch | 24 TPI1.058 mm |
| Clearance drill, close fit | 41/64″ |
| Clearance drill, close (decimal) | 0.6406 in16.27 mm |
| Clearance drill, free fit | 21/32″ |
| Clearance drill, free (decimal) | 0.6563 in16.67 mm |
| d₂Pitch diameter (basic) | 0.5660 in14.376 mm |
| D₁Minor diameter, nut (basic) | 0.5266 in13.376 mm |
Also known as
5/8-115/8"-115/8-185/8"-18
Nearest metric thread sizes
All UNC / UNF Threads sizes
Sources
- ASME B1.1-2019: Unified inch screw threads (UN, UNR and UNJ thread forms)
- Machinery's Handbook, 31st ed.: Unified thread series and tap drill sizes
- Little Machine Shop: Tap and clearance drill sizes
- Starrett: Tap drill sizes, close and free fit clearance drills
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.