1/4" SAE Washer Dimensions

SAE & USS Washers · SAE: narrow series (N)

A 1/4" SAE flat washer (SAE: narrow series, N) has a 0.281 in (7.1 mm) inside diameter, a 0.625 in (15.9 mm) outside diameter and is 0.065 in (1.65 mm) thick (nominal, ASME B18.22.1 Type A).

IDInside diameter
7.1 mm0.281 in0.281 in7.1 mm
ODOutside diameter
15.9 mm0.625 in0.625 in15.9 mm
tThickness (nominal)
1.65 mm0.065 in0.065 in1.65 mm

Drawing

⌀15.9 mm⌀0.625 in⌀7.1 mm⌀0.281 in
t 1.65 mmt 0.065 in
Drawn to scale · Dimensions in mmDimensions in inches

1/4" SAE specifications

IDInside diameter0.281 in7.1 mm
ODOutside diameter0.625 in15.9 mm
tThickness (nominal)0.065 in1.65 mm

1/4 in SAE: 9/32 in hole, 5/8 in OD, the washer for 1/4-20 and 1/4-28 bolts under a 7/16 in hex.

The same bolt size in the other series

All SAE & USS Washers sizes

Compare all 28 sizes in the SAE & USS Washers chart →

Sources

  1. ASME B18.22.1: Plain washers (Type A narrow and wide series)
  2. Bolt Depot: USS and SAE flat washer size charts
  3. AmesWeb: Type A plain washers dimensions chart
  4. GlobalSpec: Washers information (N = SAE, W = USS)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.