1/4" USS Washer Dimensions
SAE & USS Washers · USS: wide series (W)
A 1/4" USS flat washer (USS: wide series, W) has a 0.312 in (7.9 mm) inside diameter, a 0.734 in (18.6 mm) outside diameter and is 0.065 in (1.65 mm) thick (nominal, ASME B18.22.1 Type A).
- IDInside diameter
- 7.9 mm0.312 in0.312 in7.9 mm
- ODOutside diameter
- 18.6 mm0.734 in0.734 in18.6 mm
- tThickness (nominal)
- 1.65 mm0.065 in0.065 in1.65 mm
Drawing
1/4" USS specifications
| IDInside diameter | 0.312 in7.9 mm |
|---|---|
| ODOutside diameter | 0.734 in18.6 mm |
| tThickness (nominal) | 0.065 in1.65 mm |
1/4 in USS: 5/16 in hole, about 3/4 in OD.
The same bolt size in the other series
All SAE & USS Washers sizes
Sources
- ASME B18.22.1: Plain washers (Type A narrow and wide series)
- Bolt Depot: USS and SAE flat washer size charts
- AmesWeb: Type A plain washers dimensions chart
- GlobalSpec: Washers information (N = SAE, W = USS)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.