3/4" USS Washer Dimensions
SAE & USS Washers · USS: wide series (W)
A 3/4" USS flat washer (USS: wide series, W) has a 0.812 in (20.6 mm) inside diameter, a 2.000 in (50.8 mm) outside diameter and is 0.148 in (3.76 mm) thick (nominal, ASME B18.22.1 Type A).
- IDInside diameter
- 20.6 mm0.812 in0.812 in20.6 mm
- ODOutside diameter
- 50.8 mm2.000 in2.000 in50.8 mm
- tThickness (nominal)
- 3.76 mm0.148 in0.148 in3.76 mm
Drawing
3/4" USS specifications
| IDInside diameter | 0.812 in20.6 mm |
|---|---|
| ODOutside diameter | 2.000 in50.8 mm |
| tThickness (nominal) | 0.148 in3.76 mm |
The same bolt size in the other series
All SAE & USS Washers sizes
Sources
- ASME B18.22.1: Plain washers (Type A narrow and wide series)
- Bolt Depot: USS and SAE flat washer size charts
- AmesWeb: Type A plain washers dimensions chart
- GlobalSpec: Washers information (N = SAE, W = USS)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.