7/8" USS Washer Dimensions
SAE & USS Washers · USS: wide series (W)
A 7/8" USS flat washer (USS: wide series, W) has a 0.938 in (23.8 mm) inside diameter, a 2.250 in (57.2 mm) outside diameter and is 0.165 in (4.19 mm) thick (nominal, ASME B18.22.1 Type A).
- IDInside diameter
- 23.8 mm0.938 in0.938 in23.8 mm
- ODOutside diameter
- 57.2 mm2.250 in2.250 in57.2 mm
- tThickness (nominal)
- 4.19 mm0.165 in0.165 in4.19 mm
Drawing
7/8" USS specifications
| IDInside diameter | 0.938 in23.8 mm |
|---|---|
| ODOutside diameter | 2.250 in57.2 mm |
| tThickness (nominal) | 0.165 in4.19 mm |
The same bolt size in the other series
All SAE & USS Washers sizes
Sources
- ASME B18.22.1: Plain washers (Type A narrow and wide series)
- Bolt Depot: USS and SAE flat washer size charts
- AmesWeb: Type A plain washers dimensions chart
- GlobalSpec: Washers information (N = SAE, W = USS)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.