M1.4 Thread Size: Pitch, Tap Drill and Clearance Hole

Metric Threads

M1.4 is a metric thread with a major diameter of 1.4 mm (0.055 in) and a coarse pitch of 0.3 mm (84.7 TPI). Drill 1.1 mm (0.043 in) before tapping the coarse thread; the common fine thread is M1.4 × 0.2 mm, tapped with a 1.2 mm drill. For a bolt to pass through, drill a 1.6 mm (0.063 in) clearance hole (ISO 273 medium).

PCoarse pitch
0.3 mm84.7 TPI84.7 TPI0.3 mm
Tap drill, coarse
1.1 mm0.043 in0.043 in1.1 mm
Clearance hole, medium
1.6 mm0.063 in0.063 in1.6 mm
d₃Minor diameter, bolt
1.032 mm0.0406 in0.0406 in1.032 mm

Drawing

⌀1.4 mm⌀0.055 in⌀1.032 mm⌀0.0406 inP 0.3 mmP 84.7 TPI
P 0.3 mmP 84.7 TPI0.162 mm0.0064 inH₁60°
Side view at true pitch; basic 60° profile enlarged.Drawn to scale · Dimensions in mmDimensions in inches

M1.4 specifications

dMajor diameter1.4 mm0.055 in
PCoarse pitch0.3 mm84.7 TPI
Fine pitch (common)0.2 mm127.0 TPI
Fine pitches (ISO 261)0.2
Tap drill, coarse1.1 mm0.043 in
Tap drill, fine1.2 mm0.047 in
d₂Pitch diameter1.205 mm0.0474 in
D₁Minor diameter, nut1.075 mm0.0423 in
d₃Minor diameter, bolt1.032 mm0.0406 in
Clearance hole, fine1.5 mm0.059 in
Clearance hole, medium1.6 mm0.063 in
Clearance hole, coarse1.8 mm0.071 in
ISO 261 size choice2nd choice

Also known as

M1.4x0.3M1.4x0.2

Drill sizes for tapping M1.4

All Metric Threads sizes

Compare all 33 sizes in the Metric Threads chart →

Sources

  1. ISO 261:1998, ISO general purpose metric screw threads, general plan
  2. ISO 262:1998, ISO general purpose metric screw threads, selected sizes for screws, bolts and nuts
  3. ISO 724:1993, ISO general-purpose metric screw threads, basic dimensions
  4. ISO 273:1979, Fasteners, clearance holes for bolts and screws
  5. Engineering Hardware / isocnc / mechcodex: ISO 273 clearance hole tables (cross-check)
  6. DIN 336: Drill diameters for tapping holes (tap drill sizes)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.