M1.6 Thread Size: Pitch, Tap Drill and Clearance Hole

Metric Threads

M1.6 is a metric thread with a major diameter of 1.6 mm (0.063 in) and a coarse pitch of 0.35 mm (72.6 TPI). Drill 1.25 mm (0.049 in) before tapping the coarse thread; the common fine thread is M1.6 × 0.2 mm, tapped with a 1.4 mm drill. For a bolt to pass through, drill a 1.8 mm (0.071 in) clearance hole (ISO 273 medium).

PCoarse pitch
0.35 mm72.6 TPI72.6 TPI0.35 mm
Tap drill, coarse
1.25 mm0.049 in0.049 in1.25 mm
Clearance hole, medium
1.8 mm0.071 in0.071 in1.8 mm
d₃Minor diameter, bolt
1.171 mm0.0461 in0.0461 in1.171 mm

Drawing

⌀1.6 mm⌀0.063 in⌀1.171 mm⌀0.0461 inP 0.35 mmP 72.6 TPI
P 0.35 mmP 72.6 TPI0.189 mm0.0075 inH₁60°
Side view at true pitch; basic 60° profile enlarged.Drawn to scale · Dimensions in mmDimensions in inches

M1.6 specifications

dMajor diameter1.6 mm0.063 in
PCoarse pitch0.35 mm72.6 TPI
Fine pitch (common)0.2 mm127.0 TPI
Fine pitches (ISO 261)0.2
Tap drill, coarse1.25 mm0.049 in
Tap drill, fine1.4 mm0.055 in
d₂Pitch diameter1.373 mm0.0541 in
D₁Minor diameter, nut1.221 mm0.0481 in
d₃Minor diameter, bolt1.171 mm0.0461 in
Clearance hole, fine1.7 mm0.067 in
Clearance hole, medium1.8 mm0.071 in
Clearance hole, coarse2 mm0.079 in
ISO 261 size choice1st choice (preferred)

M1.6 is the smallest size with standard hex bolts and nuts (ISO 4014/4032) and socket head cap screws (ISO 4762).

Also known as

M1.6x0.35M1.6x0.2

Drill sizes for tapping M1.6

M1.6 in other charts

All Metric Threads sizes

Compare all 33 sizes in the Metric Threads chart →

Sources

  1. ISO 261:1998, ISO general purpose metric screw threads, general plan
  2. ISO 262:1998, ISO general purpose metric screw threads, selected sizes for screws, bolts and nuts
  3. ISO 724:1993, ISO general-purpose metric screw threads, basic dimensions
  4. ISO 273:1979, Fasteners, clearance holes for bolts and screws
  5. Engineering Hardware / isocnc / mechcodex: ISO 273 clearance hole tables (cross-check)
  6. DIN 336: Drill diameters for tapping holes (tap drill sizes)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.