M36 Thread Size: Pitch, Tap Drill and Clearance Hole

Metric Threads

M36 is a metric thread with a major diameter of 36 mm (1.417 in) and a coarse pitch of 4 mm (6.4 TPI). Drill 32 mm (1.260 in) before tapping the coarse thread; the common fine thread is M36 × 3 mm, tapped with a 33 mm drill. For a bolt to pass through, drill a 39 mm (1.535 in) clearance hole (ISO 273 medium).

PCoarse pitch
4 mm6.4 TPI6.4 TPI4 mm
Tap drill, coarse
32 mm1.260 in1.260 in32 mm
Clearance hole, medium
39 mm1.535 in1.535 in39 mm
d₃Minor diameter, bolt
31.093 mm1.2241 in1.2241 in31.093 mm

Drawing

⌀36 mm⌀1.417 in⌀31.093 mm⌀1.2241 inP 4 mmP 6.4 TPI
P 4 mmP 6.4 TPI2.165 mm0.0852 inH₁60°
Side view at true pitch; basic 60° profile enlarged.Drawn to scale · Dimensions in mmDimensions in inches

M36 specifications

dMajor diameter36 mm1.417 in
PCoarse pitch4 mm6.4 TPI
Fine pitch (common)3 mm8.5 TPI
Fine pitches (ISO 261)3 · 2 · 1.5
Tap drill, coarse32 mm1.260 in
Tap drill, fine33 mm1.299 in
d₂Pitch diameter33.402 mm1.3150 in
D₁Minor diameter, nut31.670 mm1.2469 in
d₃Minor diameter, bolt31.093 mm1.2241 in
Clearance hole, fine37 mm1.457 in
Clearance hole, medium39 mm1.535 in
Clearance hole, coarse42 mm1.654 in
ISO 261 size choice1st choice (preferred)

Also known as

M36x4M36x3

M36 in other charts

All Metric Threads sizes

Compare all 33 sizes in the Metric Threads chart →

Sources

  1. ISO 261:1998, ISO general purpose metric screw threads, general plan
  2. ISO 262:1998, ISO general purpose metric screw threads, selected sizes for screws, bolts and nuts
  3. ISO 724:1993, ISO general-purpose metric screw threads, basic dimensions
  4. ISO 273:1979, Fasteners, clearance holes for bolts and screws
  5. Engineering Hardware / isocnc / mechcodex: ISO 273 clearance hole tables (cross-check)
  6. DIN 336: Drill diameters for tapping holes (tap drill sizes)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.