M33 Thread Size: Pitch, Tap Drill and Clearance Hole

Metric Threads

M33 is a metric thread with a major diameter of 33 mm (1.299 in) and a coarse pitch of 3.5 mm (7.3 TPI). Drill 29.5 mm (1.161 in) before tapping the coarse thread; the common fine thread is M33 × 2 mm, tapped with a 31 mm drill. For a bolt to pass through, drill a 36 mm (1.417 in) clearance hole (ISO 273 medium).

PCoarse pitch
3.5 mm7.3 TPI7.3 TPI3.5 mm
Tap drill, coarse
29.5 mm1.161 in1.161 in29.5 mm
Clearance hole, medium
36 mm1.417 in1.417 in36 mm
d₃Minor diameter, bolt
28.706 mm1.1302 in1.1302 in28.706 mm

Drawing

⌀33 mm⌀1.299 in⌀28.706 mm⌀1.1302 inP 3.5 mmP 7.3 TPI
P 3.5 mmP 7.3 TPI1.894 mm0.0746 inH₁60°
Side view at true pitch; basic 60° profile enlarged.Drawn to scale · Dimensions in mmDimensions in inches

M33 specifications

dMajor diameter33 mm1.299 in
PCoarse pitch3.5 mm7.3 TPI
Fine pitch (common)2 mm12.7 TPI
Fine pitches (ISO 261)3 · 2 · 1.5
Tap drill, coarse29.5 mm1.161 in
Tap drill, fine31 mm1.220 in
d₂Pitch diameter30.727 mm1.2097 in
D₁Minor diameter, nut29.211 mm1.1500 in
d₃Minor diameter, bolt28.706 mm1.1302 in
Clearance hole, fine34 mm1.339 in
Clearance hole, medium36 mm1.417 in
Clearance hole, coarse38 mm1.496 in
ISO 261 size choice2nd choice

Also known as

M33x3.5M33x2

M33 in other charts

All Metric Threads sizes

Compare all 33 sizes in the Metric Threads chart →

Sources

  1. ISO 261:1998, ISO general purpose metric screw threads, general plan
  2. ISO 262:1998, ISO general purpose metric screw threads, selected sizes for screws, bolts and nuts
  3. ISO 724:1993, ISO general-purpose metric screw threads, basic dimensions
  4. ISO 273:1979, Fasteners, clearance holes for bolts and screws
  5. Engineering Hardware / isocnc / mechcodex: ISO 273 clearance hole tables (cross-check)
  6. DIN 336: Drill diameters for tapping holes (tap drill sizes)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.