M56 Thread Size: Pitch, Tap Drill and Clearance Hole

Metric Threads

M56 is a metric thread with a major diameter of 56 mm (2.205 in) and a coarse pitch of 5.5 mm (4.6 TPI). Drill 50.5 mm (1.988 in) before tapping the coarse thread; the common fine thread is M56 × 4 mm, tapped with a 52 mm drill. For a bolt to pass through, drill a 62 mm (2.441 in) clearance hole (ISO 273 medium).

PCoarse pitch
5.5 mm4.6 TPI4.6 TPI5.5 mm
Tap drill, coarse
50.5 mm1.988 in1.988 in50.5 mm
Clearance hole, medium
62 mm2.441 in2.441 in62 mm
d₃Minor diameter, bolt
49.252 mm1.9391 in1.9391 in49.252 mm

Drawing

⌀56 mm⌀2.205 in⌀49.252 mm⌀1.9391 inP 5.5 mmP 4.6 TPI
P 5.5 mmP 4.6 TPI2.977 mm0.1172 inH₁60°
Side view at true pitch; basic 60° profile enlarged.Drawn to scale · Dimensions in mmDimensions in inches

M56 specifications

dMajor diameter56 mm2.205 in
PCoarse pitch5.5 mm4.6 TPI
Fine pitch (common)4 mm6.4 TPI
Fine pitches (ISO 261)4 · 3 · 2 · 1.5
Tap drill, coarse50.5 mm1.988 in
Tap drill, fine52 mm2.047 in
d₂Pitch diameter52.428 mm2.0641 in
D₁Minor diameter, nut50.046 mm1.9703 in
d₃Minor diameter, bolt49.252 mm1.9391 in
Clearance hole, fine58 mm2.283 in
Clearance hole, medium62 mm2.441 in
Clearance hole, coarse66 mm2.598 in
ISO 261 size choice1st choice (preferred)

Also known as

M56x5.5M56x4

M56 in other charts

All Metric Threads sizes

Compare all 33 sizes in the Metric Threads chart →

Sources

  1. ISO 261:1998, ISO general purpose metric screw threads, general plan
  2. ISO 262:1998, ISO general purpose metric screw threads, selected sizes for screws, bolts and nuts
  3. ISO 724:1993, ISO general-purpose metric screw threads, basic dimensions
  4. ISO 273:1979, Fasteners, clearance holes for bolts and screws
  5. Engineering Hardware / isocnc / mechcodex: ISO 273 clearance hole tables (cross-check)
  6. DIN 336: Drill diameters for tapping holes (tap drill sizes)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.