M52 Thread Size: Pitch, Tap Drill and Clearance Hole
Metric Threads
M52 is a metric thread with a major diameter of 52 mm (2.047 in) and a coarse pitch of 5 mm (5.1 TPI). Drill 47 mm (1.850 in) before tapping the coarse thread; the common fine thread is M52 × 4 mm, tapped with a 48 mm drill. For a bolt to pass through, drill a 56 mm (2.205 in) clearance hole (ISO 273 medium).
- PCoarse pitch
- 5 mm5.1 TPI5.1 TPI5 mm
- Tap drill, coarse
- 47 mm1.850 in1.850 in47 mm
- Clearance hole, medium
- 56 mm2.205 in2.205 in56 mm
- d₃Minor diameter, bolt
- 45.866 mm1.8057 in1.8057 in45.866 mm
Drawing
M52 specifications
| dMajor diameter | 52 mm2.047 in |
|---|---|
| PCoarse pitch | 5 mm5.1 TPI |
| Fine pitch (common) | 4 mm6.4 TPI |
| Fine pitches (ISO 261) | 4 · 3 · 2 · 1.5 |
| Tap drill, coarse | 47 mm1.850 in |
| Tap drill, fine | 48 mm1.890 in |
| d₂Pitch diameter | 48.752 mm1.9194 in |
| D₁Minor diameter, nut | 46.587 mm1.8341 in |
| d₃Minor diameter, bolt | 45.866 mm1.8057 in |
| Clearance hole, fine | 54 mm2.126 in |
| Clearance hole, medium | 56 mm2.205 in |
| Clearance hole, coarse | 62 mm2.441 in |
| ISO 261 size choice | 2nd choice |
Also known as
M52x5M52x4
M52 in other charts
All Metric Threads sizes
Sources
- ISO 261:1998, ISO general purpose metric screw threads, general plan
- ISO 262:1998, ISO general purpose metric screw threads, selected sizes for screws, bolts and nuts
- ISO 724:1993, ISO general-purpose metric screw threads, basic dimensions
- ISO 273:1979, Fasteners, clearance holes for bolts and screws
- Engineering Hardware / isocnc / mechcodex: ISO 273 clearance hole tables (cross-check)
- DIN 336: Drill diameters for tapping holes (tap drill sizes)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.