100L Motor Frame Dimensions

Motor Frame Sizes · IEC 60072-1 (mm)

The 100L frame (IEC 60072-1, mm) has a shaft height of 100 mm (3.937 in) and a 28 mm (1.102 in) shaft 60 mm (2.362 in) long. Foot holes: 160 mm (6.299 in) across × 140 mm (5.512 in) along, the first one 63 mm (2.480 in) from the shaft shoulder; hole diameter 12 mm (0.472 in).

HShaft height (IEC H / NEMA D)
100 mm3.937 in3.937 in100 mm
DShaft diameter (IEC D / NEMA U)
28 mm1.102 in1.102 in28 mm
AFoot holes across (IEC A / NEMA 2E)
160 mm6.299 in6.299 in160 mm
BFoot holes along (IEC B / NEMA 2F)
140 mm5.512 in5.512 in140 mm

Drawing

Drive-end viewA = 160 mmA = 6.299 inH = 100 mmH = 3.937 in
Side viewB = 140 mmB = 5.512 inC = 63 mmC = 2.480 inE = 60 mmE = 2.362 in⌀D = 28 mm⌀D = 1.102 in
Mounting dimensions to scale for this frame; body, fan cowl and terminal box are schematic.Drawn to scale · Dimensions in mmDimensions in inches

100L specifications

HShaft height (IEC H / NEMA D)100 mm3.937 in
AFoot holes across (IEC A / NEMA 2E)160 mm6.299 in
BFoot holes along (IEC B / NEMA 2F)140 mm5.512 in
CShaft shoulder to first hole (IEC C / NEMA BA)63 mm2.480 in
KFoot bolt hole (IEC K / NEMA H)12 mm0.472 in
DShaft diameter (IEC D / NEMA U)28 mm1.102 in
EShaft extension (IEC E / NEMA N-W)60 mm2.362 in

IEC 100L has no S or M variant; it shares the 28 × 60 mm shaft with 112M.

All motor frames

All 48 motor frames →

Sources

  1. IEC 60072-1:2022, Dimensions and output series for rotating electrical machines, Part 1: Frame numbers 56 to 400
  2. NEMA MG 1: Motors and Generators, Part 4 (dimensions, frame designations)
  3. Regal Rexnord: Quick reference motor dimensions (NEMA frame chart)
  4. Motion Industries: NEMA quick reference chart
  5. Electric Motor Warehouse / Drive Centre: IEC quick reference dimensional charts
  6. ABB / WEG / Brook Crompton low-voltage motor catalogues: IEC dimension tables

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.