90L Motor Frame Dimensions

Motor Frame Sizes · IEC 60072-1 (mm)

The 90L frame (IEC 60072-1, mm) has a shaft height of 90 mm (3.543 in) and a 24 mm (0.945 in) shaft 50 mm (1.969 in) long. Foot holes: 140 mm (5.512 in) across × 125 mm (4.921 in) along, the first one 56 mm (2.205 in) from the shaft shoulder; hole diameter 10 mm (0.394 in).

HShaft height (IEC H / NEMA D)
90 mm3.543 in3.543 in90 mm
DShaft diameter (IEC D / NEMA U)
24 mm0.945 in0.945 in24 mm
AFoot holes across (IEC A / NEMA 2E)
140 mm5.512 in5.512 in140 mm
BFoot holes along (IEC B / NEMA 2F)
125 mm4.921 in4.921 in125 mm

Drawing

Drive-end viewA = 140 mmA = 5.512 inH = 90 mmH = 3.543 in
Side viewB = 125 mmB = 4.921 inC = 56 mmC = 2.205 inE = 50 mmE = 1.969 in⌀D = 24 mm⌀D = 0.945 in
Mounting dimensions to scale for this frame; body, fan cowl and terminal box are schematic.Drawn to scale · Dimensions in mmDimensions in inches

90L specifications

HShaft height (IEC H / NEMA D)90 mm3.543 in
AFoot holes across (IEC A / NEMA 2E)140 mm5.512 in
BFoot holes along (IEC B / NEMA 2F)125 mm4.921 in
CShaft shoulder to first hole (IEC C / NEMA BA)56 mm2.205 in
KFoot bolt hole (IEC K / NEMA H)10 mm0.394 in
DShaft diameter (IEC D / NEMA U)24 mm0.945 in
EShaft extension (IEC E / NEMA N-W)50 mm1.969 in

Same shaft height, other foot length

Similar shaft height in the other system

All motor frames

All 48 motor frames →

Sources

  1. IEC 60072-1:2022, Dimensions and output series for rotating electrical machines, Part 1: Frame numbers 56 to 400
  2. NEMA MG 1: Motors and Generators, Part 4 (dimensions, frame designations)
  3. Regal Rexnord: Quick reference motor dimensions (NEMA frame chart)
  4. Motion Industries: NEMA quick reference chart
  5. Electric Motor Warehouse / Drive Centre: IEC quick reference dimensional charts
  6. ABB / WEG / Brook Crompton low-voltage motor catalogues: IEC dimension tables

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.