184T Motor Frame Dimensions

Motor Frame Sizes · NEMA MG 1 (inch)

The 184T frame (NEMA MG 1, inch) has a shaft height of 4 1/2 in (114.3 mm) and a 1 1/8 in (28.6 mm) shaft 2 3/4 in (69.9 mm) long. Foot holes: 7 1/2 in (190.5 mm) across × 5 1/2 in (139.7 mm) along, the first one 2 3/4 in (69.9 mm) from the shaft shoulder; hole diameter 13/32 in (10.3 mm).

HShaft height (IEC H / NEMA D)
114.3 mm4 1/2 in4 1/2 in114.3 mm
DShaft diameter (IEC D / NEMA U)
28.6 mm1 1/8 in1 1/8 in28.6 mm
AFoot holes across (IEC A / NEMA 2E)
190.5 mm7 1/2 in7 1/2 in190.5 mm
BFoot holes along (IEC B / NEMA 2F)
139.7 mm5 1/2 in5 1/2 in139.7 mm

Drawing

Drive-end view2E = 190.5 mm2E = 7 1/2 inD = 114.3 mmD = 4 1/2 in
Side view2F = 139.7 mm2F = 5 1/2 inBA = 69.9 mmBA = 2 3/4 inN-W = 69.9 mmN-W = 2 3/4 inU = 28.6 mmU = 1 1/8 in
Mounting dimensions to scale for this frame; body, fan cowl and terminal box are schematic.Drawn to scale · Dimensions in mmDimensions in inches

184T specifications

HShaft height (IEC H / NEMA D)114.3 mm4 1/2 in
AFoot holes across (IEC A / NEMA 2E)190.5 mm7 1/2 in
BFoot holes along (IEC B / NEMA 2F)139.7 mm5 1/2 in
CShaft shoulder to first hole (IEC C / NEMA BA)69.9 mm2 3/4 in
KFoot bolt hole (IEC K / NEMA H)10.3 mm13/32 in
DShaft diameter (IEC D / NEMA U)28.6 mm1 1/8 in
EShaft extension (IEC E / NEMA N-W)69.9 mm2 3/4 in

Same shaft height, other foot length

Similar shaft height in the other system

All motor frames

All 48 motor frames →

Sources

  1. IEC 60072-1:2022, Dimensions and output series for rotating electrical machines, Part 1: Frame numbers 56 to 400
  2. NEMA MG 1: Motors and Generators, Part 4 (dimensions, frame designations)
  3. Regal Rexnord: Quick reference motor dimensions (NEMA frame chart)
  4. Motion Industries: NEMA quick reference chart
  5. Electric Motor Warehouse / Drive Centre: IEC quick reference dimensional charts
  6. ABB / WEG / Brook Crompton low-voltage motor catalogues: IEC dimension tables

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.