213T Motor Frame Dimensions
Motor Frame Sizes · NEMA MG 1 (inch)
The 213T frame (NEMA MG 1, inch) has a shaft height of 5 1/4 in (133.4 mm) and a 1 3/8 in (34.9 mm) shaft 3 3/8 in (85.7 mm) long. Foot holes: 8 1/2 in (215.9 mm) across × 5 1/2 in (139.7 mm) along, the first one 3 1/2 in (88.9 mm) from the shaft shoulder; hole diameter 13/32 in (10.3 mm).
- HShaft height (IEC H / NEMA D)
- 133.4 mm5 1/4 in5 1/4 in133.4 mm
- DShaft diameter (IEC D / NEMA U)
- 34.9 mm1 3/8 in1 3/8 in34.9 mm
- AFoot holes across (IEC A / NEMA 2E)
- 215.9 mm8 1/2 in8 1/2 in215.9 mm
- BFoot holes along (IEC B / NEMA 2F)
- 139.7 mm5 1/2 in5 1/2 in139.7 mm
Drawing
213T specifications
| HShaft height (IEC H / NEMA D) | 133.4 mm5 1/4 in |
|---|---|
| AFoot holes across (IEC A / NEMA 2E) | 215.9 mm8 1/2 in |
| BFoot holes along (IEC B / NEMA 2F) | 139.7 mm5 1/2 in |
| CShaft shoulder to first hole (IEC C / NEMA BA) | 88.9 mm3 1/2 in |
| KFoot bolt hole (IEC K / NEMA H) | 10.3 mm13/32 in |
| DShaft diameter (IEC D / NEMA U) | 34.9 mm1 3/8 in |
| EShaft extension (IEC E / NEMA N-W) | 85.7 mm3 3/8 in |
Close to IEC 132 in shaft height (5.25 in = 133.35 mm), but with a 1-3/8 in shaft against 38 mm.
Same shaft height, other foot length
Similar shaft height in the other system
All motor frames
Sources
- IEC 60072-1:2022, Dimensions and output series for rotating electrical machines, Part 1: Frame numbers 56 to 400
- NEMA MG 1: Motors and Generators, Part 4 (dimensions, frame designations)
- Regal Rexnord: Quick reference motor dimensions (NEMA frame chart)
- Motion Industries: NEMA quick reference chart
- Electric Motor Warehouse / Drive Centre: IEC quick reference dimensional charts
- ABB / WEG / Brook Crompton low-voltage motor catalogues: IEC dimension tables
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.