42 Motor Frame Dimensions

Motor Frame Sizes · NEMA MG 1 (inch)

The 42 frame (NEMA MG 1, inch) has a shaft height of 2 5/8 in (66.7 mm) and a 3/8 in (9.5 mm) shaft 1 1/8 in (28.6 mm) long. Foot holes: 3 1/2 in (88.9 mm) across × 1.688 in (42.9 mm) along, the first one 2.062 in (52.4 mm) from the shaft shoulder; hole diameter 9/32 in (7.1 mm).

HShaft height (IEC H / NEMA D)
66.7 mm2 5/8 in2 5/8 in66.7 mm
DShaft diameter (IEC D / NEMA U)
9.5 mm3/8 in3/8 in9.5 mm
AFoot holes across (IEC A / NEMA 2E)
88.9 mm3 1/2 in3 1/2 in88.9 mm
BFoot holes along (IEC B / NEMA 2F)
42.9 mm1.688 in1.688 in42.9 mm

Drawing

Drive-end view2E = 88.9 mm2E = 3 1/2 inD = 66.7 mmD = 2 5/8 in
Side view2F = 42.9 mm2F = 1.688 inBA = 52.4 mmBA = 2.062 inN-W = 28.6 mmN-W = 1 1/8 inU = 9.5 mmU = 3/8 in
Mounting dimensions to scale for this frame; body, fan cowl and terminal box are schematic.Drawn to scale · Dimensions in mmDimensions in inches

42 specifications

HShaft height (IEC H / NEMA D)66.7 mm2 5/8 in
AFoot holes across (IEC A / NEMA 2E)88.9 mm3 1/2 in
BFoot holes along (IEC B / NEMA 2F)42.9 mm1.688 in
CShaft shoulder to first hole (IEC C / NEMA BA)52.4 mm2.062 in
KFoot bolt hole (IEC K / NEMA H)7.1 mm9/32 in
DShaft diameter (IEC D / NEMA U)9.5 mm3/8 in
EShaft extension (IEC E / NEMA N-W)28.6 mm1 1/8 in

Similar shaft height in the other system

All motor frames

All 48 motor frames →

Sources

  1. IEC 60072-1:2022, Dimensions and output series for rotating electrical machines, Part 1: Frame numbers 56 to 400
  2. NEMA MG 1: Motors and Generators, Part 4 (dimensions, frame designations)
  3. Regal Rexnord: Quick reference motor dimensions (NEMA frame chart)
  4. Motion Industries: NEMA quick reference chart
  5. Electric Motor Warehouse / Drive Centre: IEC quick reference dimensional charts
  6. ABB / WEG / Brook Crompton low-voltage motor catalogues: IEC dimension tables

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.