48 Motor Frame Dimensions

Motor Frame Sizes · NEMA MG 1 (inch)

The 48 frame (NEMA MG 1, inch) has a shaft height of 3 in (76.2 mm) and a 1/2 in (12.7 mm) shaft 1 1/2 in (38.1 mm) long. Foot holes: 4 1/4 in (108 mm) across × 2 3/4 in (69.9 mm) along, the first one 2 1/2 in (63.5 mm) from the shaft shoulder; hole diameter 11/32 in (8.7 mm).

HShaft height (IEC H / NEMA D)
76.2 mm3 in3 in76.2 mm
DShaft diameter (IEC D / NEMA U)
12.7 mm1/2 in1/2 in12.7 mm
AFoot holes across (IEC A / NEMA 2E)
108 mm4 1/4 in4 1/4 in108 mm
BFoot holes along (IEC B / NEMA 2F)
69.9 mm2 3/4 in2 3/4 in69.9 mm

Drawing

Drive-end view2E = 108 mm2E = 4 1/4 inD = 76.2 mmD = 3 in
Side view2F = 69.9 mm2F = 2 3/4 inBA = 63.5 mmBA = 2 1/2 inN-W = 38.1 mmN-W = 1 1/2 inU = 12.7 mmU = 1/2 in
Mounting dimensions to scale for this frame; body, fan cowl and terminal box are schematic.Drawn to scale · Dimensions in mmDimensions in inches

48 specifications

HShaft height (IEC H / NEMA D)76.2 mm3 in
AFoot holes across (IEC A / NEMA 2E)108 mm4 1/4 in
BFoot holes along (IEC B / NEMA 2F)69.9 mm2 3/4 in
CShaft shoulder to first hole (IEC C / NEMA BA)63.5 mm2 1/2 in
KFoot bolt hole (IEC K / NEMA H)8.7 mm11/32 in
DShaft diameter (IEC D / NEMA U)12.7 mm1/2 in
EShaft extension (IEC E / NEMA N-W)38.1 mm1 1/2 in

Similar shaft height in the other system

All motor frames

All 48 motor frames →

Sources

  1. IEC 60072-1:2022, Dimensions and output series for rotating electrical machines, Part 1: Frame numbers 56 to 400
  2. NEMA MG 1: Motors and Generators, Part 4 (dimensions, frame designations)
  3. Regal Rexnord: Quick reference motor dimensions (NEMA frame chart)
  4. Motion Industries: NEMA quick reference chart
  5. Electric Motor Warehouse / Drive Centre: IEC quick reference dimensional charts
  6. ABB / WEG / Brook Crompton low-voltage motor catalogues: IEC dimension tables

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.