71 Motor Frame Dimensions
Motor Frame Sizes · IEC 60072-1 (mm)
The 71 frame (IEC 60072-1, mm) has a shaft height of 71 mm (2.795 in) and a 14 mm (0.551 in) shaft 30 mm (1.181 in) long. Foot holes: 112 mm (4.409 in) across × 90 mm (3.543 in) along, the first one 45 mm (1.772 in) from the shaft shoulder; hole diameter 7 mm (0.276 in).
- HShaft height (IEC H / NEMA D)
- 71 mm2.795 in2.795 in71 mm
- DShaft diameter (IEC D / NEMA U)
- 14 mm0.551 in0.551 in14 mm
- AFoot holes across (IEC A / NEMA 2E)
- 112 mm4.409 in4.409 in112 mm
- BFoot holes along (IEC B / NEMA 2F)
- 90 mm3.543 in3.543 in90 mm
Drawing
71 specifications
| HShaft height (IEC H / NEMA D) | 71 mm2.795 in |
|---|---|
| AFoot holes across (IEC A / NEMA 2E) | 112 mm4.409 in |
| BFoot holes along (IEC B / NEMA 2F) | 90 mm3.543 in |
| CShaft shoulder to first hole (IEC C / NEMA BA) | 45 mm1.772 in |
| KFoot bolt hole (IEC K / NEMA H) | 7 mm0.276 in |
| DShaft diameter (IEC D / NEMA U) | 14 mm0.551 in |
| EShaft extension (IEC E / NEMA N-W) | 30 mm1.181 in |
All motor frames
Sources
- IEC 60072-1:2022, Dimensions and output series for rotating electrical machines, Part 1: Frame numbers 56 to 400
- NEMA MG 1: Motors and Generators, Part 4 (dimensions, frame designations)
- Regal Rexnord: Quick reference motor dimensions (NEMA frame chart)
- Motion Industries: NEMA quick reference chart
- Electric Motor Warehouse / Drive Centre: IEC quick reference dimensional charts
- ABB / WEG / Brook Crompton low-voltage motor catalogues: IEC dimension tables
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.