80 Motor Frame Dimensions
Motor Frame Sizes · IEC 60072-1 (mm)
The 80 frame (IEC 60072-1, mm) has a shaft height of 80 mm (3.150 in) and a 19 mm (0.748 in) shaft 40 mm (1.575 in) long. Foot holes: 125 mm (4.921 in) across × 100 mm (3.937 in) along, the first one 50 mm (1.969 in) from the shaft shoulder; hole diameter 10 mm (0.394 in).
- HShaft height (IEC H / NEMA D)
- 80 mm3.150 in3.150 in80 mm
- DShaft diameter (IEC D / NEMA U)
- 19 mm0.748 in0.748 in19 mm
- AFoot holes across (IEC A / NEMA 2E)
- 125 mm4.921 in4.921 in125 mm
- BFoot holes along (IEC B / NEMA 2F)
- 100 mm3.937 in3.937 in100 mm
Drawing
80 specifications
| HShaft height (IEC H / NEMA D) | 80 mm3.150 in |
|---|---|
| AFoot holes across (IEC A / NEMA 2E) | 125 mm4.921 in |
| BFoot holes along (IEC B / NEMA 2F) | 100 mm3.937 in |
| CShaft shoulder to first hole (IEC C / NEMA BA) | 50 mm1.969 in |
| KFoot bolt hole (IEC K / NEMA H) | 10 mm0.394 in |
| DShaft diameter (IEC D / NEMA U) | 19 mm0.748 in |
| EShaft extension (IEC E / NEMA N-W) | 40 mm1.575 in |
Similar shaft height in the other system
All motor frames
Sources
- IEC 60072-1:2022, Dimensions and output series for rotating electrical machines, Part 1: Frame numbers 56 to 400
- NEMA MG 1: Motors and Generators, Part 4 (dimensions, frame designations)
- Regal Rexnord: Quick reference motor dimensions (NEMA frame chart)
- Motion Industries: NEMA quick reference chart
- Electric Motor Warehouse / Drive Centre: IEC quick reference dimensional charts
- ABB / WEG / Brook Crompton low-voltage motor catalogues: IEC dimension tables
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.