Nail Size Chart: Penny Sizes 2d to 60d

Length, shank diameter, head size and approximate count per pound for US nails by penny size, from 2d to 60d. The quick rule: from 2d to 10d each penny adds 1/4 inch to a 1-inch 2d nail, so a 10d is 3 in; above that the steps are irregular (16d = 3-1/2 in, 20d = 4 in).

16 sizesChecked 2026-11-153 sources
Common nails standing side by side; grid lines every inch. Diameter grows with length.Drawn to scale · Dimensions in mmDimensions in inches

Size chartTap a size for its drawing and full specs

16 of 16
SizeLLengthmmindShank diameter, common nailmminWire gauge, common naildShank diameter, box nailmminHHead diameter, common nailmminApprox. count per lb (common)
2d2511.830.07215——845–876
3d321 1/42.030.080141.930.076—540–568
4d381 1/22.490.09812½2.030.080—290–316
5d441 3/42.490.09812½2.030.080—250–271
6d5122.870.11311½2.510.0996.80.266165–181
7d572 1/42.870.11311½2.510.099—150–161
8d642 1/23.330.13110¼2.870.1137.10.281100–106
9d702 3/43.330.13110¼2.870.113—90–96
10d7633.760.14893.250.1287.90.31265–69
12d833 1/43.760.14893.250.1287.90.31260–63
16d893 1/24.110.16283.430.1358.70.34445–49
20d10244.880.19263.760.14810.30.40629–31
30d1144 1/25.260.20753.760.14811.10.43822–24
40d12755.720.22544.110.16211.90.46917–18
50d1405 1/26.200.2443—12.70.50013–14
60d15266.680.2632—13.50.53110–11

How the penny system works

The d in 16d stands for denarius, the Roman penny, and goes back to the price of a hundred nails in 15th-century England. Today it is only a length code. 2d = 1 in, and each penny up to 10d adds 1/4 in: 3d = 1-1/4, 4d = 1-1/2, 6d = 2, 8d = 2-1/2, 10d = 3 in. Then 12d = 3-1/4, 16d = 3-1/2, 20d = 4, 30d = 4-1/2, 40d = 5, 50d = 5-1/2, 60d = 6 in.

The same penny size comes in several shank diameters. Common nails have the thickest shank and are the reference for structural nailing schedules in the building code. Box nails are thinner to reduce splitting. Sinkers are coated framing nails slightly shorter and thinner than commons (a 16d sinker is 3-1/4 × 0.148 in). Framing-gun nails are sold by length × diameter (e.g. 3-1/4 × 0.131 in) rather than penny size.

Shank diameter matters as much as length: lateral strength of a nailed joint rises steeply with diameter. When a plan calls for "16d common", a 16d box or 0.131-in gun nail is weaker and usually needs closer spacing. Check the nailing schedule or the nail manufacturer's evaluation report.

About Nail Sizes

Choosing length: for full design strength the NDS asks for the nail to penetrate the member holding the point by at least 10 shank diameters (a 16d common: about 1-5/8 in). That is why 1× boards take 6d or 8d nails, 2× framing face-nailed to 2× takes 16d, and toe-nails are usually 8d or 10d.

Diameters in the chart are ASTM F1667 / NDS nominal values for bright steel wire nails, with the equivalent steel wire gauge for common nails. Coatings (cement, vinyl, galvanizing) add a little to the measured diameter. Hot-dip galvanized nails for treated lumber and exterior work are often a little thicker than bright nails of the same size.

Counts per pound are typical ranges for bright common nails from manufacturers' tables; heads, points and coatings change them by several percent. Use them for estimating, and buy by weight with a margin.

Metric nails

Outside North America nails are designated by shank diameter × length in millimetres, e.g. 3.1 × 90 mm (close to a 16d sinker) or 2.8 × 65 mm, following EN 10230-1. There is no penny equivalent: convert by length and diameter. A 16d common is 4.1 × 89 mm; an 8d common is 3.3 × 63.5 mm.

Questions

How long is a 16d nail?

3-1/2 in (89 mm). A 16d common nail has a 0.162 in (4.1 mm) shank; a 16d box nail 0.135 in; a 16d sinker is 3-1/4 in long and 0.148 in thick.

What does the d in nail sizes mean?

It stands for denarius, the Roman penny used in old English money. The penny size once described the price of 100 nails; now it is only a length code: 2d = 1 in, 8d = 2-1/2 in, 16d = 3-1/2 in.

What size is an 8d nail?

2-1/2 in (64 mm) long. 8d common: 0.131 in diameter; 8d box: 0.113 in. Around 100–106 8d common nails make a pound.

What is the difference between common and box nails?

Same length, thinner shank. A box nail is less likely to split the wood but holds less. For a 10d: common 0.148 in, box 0.128 in.

How many 16d nails are in a pound?

About 45–49 bright 16d common nails. Box nails and coated sinkers are thinner, so a pound holds noticeably more. Check the count on the box.

Sources

  1. ASTM F1667: Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
  2. American Wood Council: National Design Specification (NDS) for Wood Construction, Table L4 (nail dimensions)
  3. USDA Forest Products Laboratory: Wood Handbook, chapter on mechanical fastenings (nail sizes and penny designations)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.