10 × 8 Parallel Key and Keyway Dimensions
Parallel Keys · Metric: DIN 6885-1 form A / ISO 773
A 10 × 8 key (Metric: DIN 6885-1 form A / ISO 773) is used on shafts of 30–38 mm (1.181–1.496 in). The shaft keyway is 5 mm (0.197 in) deep and the hub keyway 3.3 mm (0.130 in) deep.
- dShaft diameter (over – up to)
- 30–38 mm1.181–1.496 in1.181–1.496 in30–38 mm
- bWidth
- 10 mm0.394 in0.394 in10 mm
- t1Shaft keyway depth
- 5 mm0.197 in0.197 in5 mm
- t2Hub keyway depth
- 3.3 mm0.130 in0.130 in3.3 mm
Drawing
10 × 8 specifications
| dShaft diameter (over – up to) | 30–38 mm1.181–1.496 in |
|---|---|
| bWidth | 10 mm0.394 in |
| hHeight | 8 mm0.315 in |
| t1Shaft keyway depth | 5 mm0.197 in |
| t2Hub keyway depth | 3.3 mm0.130 in |
All Parallel Keys sizes
Sources
- DIN 6885-1:2021, Parallel keys, keyways, deep pattern: dimensions, tolerances, mass
- ANSI B17.1: Keys and keyseats (square and flat parallel keys)
- fasten.it: DIN 6885-1 dimension table
- Böllhoff: DIN 6885 steel parallel keys data sheet
- Gantner: DIN 6885 parallel keys
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.