12 × 8 Parallel Key and Keyway Dimensions

Parallel Keys · Metric: DIN 6885-1 form A / ISO 773

A 12 × 8 key (Metric: DIN 6885-1 form A / ISO 773) is used on shafts of 38–44 mm (1.496–1.732 in). The shaft keyway is 5 mm (0.197 in) deep and the hub keyway 3.3 mm (0.130 in) deep.

dShaft diameter (over – up to)
38–44 mm1.496–1.732 in1.496–1.732 in38–44 mm
bWidth
12 mm0.472 in0.472 in12 mm
t1Shaft keyway depth
5 mm0.197 in0.197 in5 mm
t2Hub keyway depth
3.3 mm0.130 in0.130 in3.3 mm

Drawing

b 12 mmb 0.472 int1 5 mmt1 0.197 int2 3.3 mmt2 0.130 in⌀41 mm⌀1.614 in
Shaft drawn at the middle of the key's shaft rangeDrawn to scale · Dimensions in mmDimensions in inches

12 × 8 specifications

dShaft diameter (over – up to)38–44 mm1.496–1.732 in
bWidth12 mm0.472 in
hHeight8 mm0.315 in
t1Shaft keyway depth5 mm0.197 in
t2Hub keyway depth3.3 mm0.130 in

All Parallel Keys sizes

Compare all 29 sizes in the Parallel Keys chart →

Sources

  1. DIN 6885-1:2021, Parallel keys, keyways, deep pattern: dimensions, tolerances, mass
  2. ANSI B17.1: Keys and keyseats (square and flat parallel keys)
  3. fasten.it: DIN 6885-1 dimension table
  4. Böllhoff: DIN 6885 steel parallel keys data sheet
  5. Gantner: DIN 6885 parallel keys

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.