8 × 7 Parallel Key and Keyway Dimensions

Parallel Keys · Metric: DIN 6885-1 form A / ISO 773

A 8 × 7 key (Metric: DIN 6885-1 form A / ISO 773) is used on shafts of 22–30 mm (0.866–1.181 in). The shaft keyway is 4 mm (0.157 in) deep and the hub keyway 3.3 mm (0.130 in) deep.

dShaft diameter (over – up to)
22–30 mm0.866–1.181 in0.866–1.181 in22–30 mm
bWidth
8 mm0.315 in0.315 in8 mm
t1Shaft keyway depth
4 mm0.157 in0.157 in4 mm
t2Hub keyway depth
3.3 mm0.130 in0.130 in3.3 mm

Drawing

b 8 mmb 0.315 int1 4 mmt1 0.157 int2 3.3 mmt2 0.130 in⌀26 mm⌀1.024 in
Shaft drawn at the middle of the key's shaft rangeDrawn to scale · Dimensions in mmDimensions in inches

8 × 7 specifications

dShaft diameter (over – up to)22–30 mm0.866–1.181 in
bWidth8 mm0.315 in
hHeight7 mm0.276 in
t1Shaft keyway depth4 mm0.157 in
t2Hub keyway depth3.3 mm0.130 in

8 × 7 is the key for 22–30 mm shafts, e.g. 24 mm and 28 mm gear motor shafts. Shaft keyway 4 mm, hub keyway 3.3 mm.

All Parallel Keys sizes

Compare all 29 sizes in the Parallel Keys chart →

Sources

  1. DIN 6885-1:2021, Parallel keys, keyways, deep pattern: dimensions, tolerances, mass
  2. ANSI B17.1: Keys and keyseats (square and flat parallel keys)
  3. fasten.it: DIN 6885-1 dimension table
  4. Böllhoff: DIN 6885 steel parallel keys data sheet
  5. Gantner: DIN 6885 parallel keys

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.