14 × 9 Parallel Key and Keyway Dimensions
Parallel Keys · Metric: DIN 6885-1 form A / ISO 773
A 14 × 9 key (Metric: DIN 6885-1 form A / ISO 773) is used on shafts of 44–50 mm (1.732–1.969 in). The shaft keyway is 5.5 mm (0.217 in) deep and the hub keyway 3.8 mm (0.150 in) deep.
- dShaft diameter (over – up to)
- 44–50 mm1.732–1.969 in1.732–1.969 in44–50 mm
- bWidth
- 14 mm0.551 in0.551 in14 mm
- t1Shaft keyway depth
- 5.5 mm0.217 in0.217 in5.5 mm
- t2Hub keyway depth
- 3.8 mm0.150 in0.150 in3.8 mm
Drawing
14 × 9 specifications
| dShaft diameter (over – up to) | 44–50 mm1.732–1.969 in |
|---|---|
| bWidth | 14 mm0.551 in |
| hHeight | 9 mm0.354 in |
| t1Shaft keyway depth | 5.5 mm0.217 in |
| t2Hub keyway depth | 3.8 mm0.150 in |
All Parallel Keys sizes
Sources
- DIN 6885-1:2021, Parallel keys, keyways, deep pattern: dimensions, tolerances, mass
- ANSI B17.1: Keys and keyseats (square and flat parallel keys)
- fasten.it: DIN 6885-1 dimension table
- Böllhoff: DIN 6885 steel parallel keys data sheet
- Gantner: DIN 6885 parallel keys
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.