16 × 10 Parallel Key and Keyway Dimensions

Parallel Keys · Metric: DIN 6885-1 form A / ISO 773

A 16 × 10 key (Metric: DIN 6885-1 form A / ISO 773) is used on shafts of 50–58 mm (1.969–2.283 in). The shaft keyway is 6 mm (0.236 in) deep and the hub keyway 4.3 mm (0.169 in) deep.

dShaft diameter (over – up to)
50–58 mm1.969–2.283 in1.969–2.283 in50–58 mm
bWidth
16 mm0.630 in0.630 in16 mm
t1Shaft keyway depth
6 mm0.236 in0.236 in6 mm
t2Hub keyway depth
4.3 mm0.169 in0.169 in4.3 mm

Drawing

b 16 mmb 0.630 int1 6 mmt1 0.236 int2 4.3 mmt2 0.169 in⌀54 mm⌀2.126 in
Shaft drawn at the middle of the key's shaft rangeDrawn to scale · Dimensions in mmDimensions in inches

16 × 10 specifications

dShaft diameter (over – up to)50–58 mm1.969–2.283 in
bWidth16 mm0.630 in
hHeight10 mm0.394 in
t1Shaft keyway depth6 mm0.236 in
t2Hub keyway depth4.3 mm0.169 in

All Parallel Keys sizes

Compare all 29 sizes in the Parallel Keys chart →

Sources

  1. DIN 6885-1:2021, Parallel keys, keyways, deep pattern: dimensions, tolerances, mass
  2. ANSI B17.1: Keys and keyseats (square and flat parallel keys)
  3. fasten.it: DIN 6885-1 dimension table
  4. Böllhoff: DIN 6885 steel parallel keys data sheet
  5. Gantner: DIN 6885 parallel keys

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.