18 × 11 Parallel Key and Keyway Dimensions
Parallel Keys · Metric: DIN 6885-1 form A / ISO 773
A 18 × 11 key (Metric: DIN 6885-1 form A / ISO 773) is used on shafts of 58–65 mm (2.283–2.559 in). The shaft keyway is 7 mm (0.276 in) deep and the hub keyway 4.4 mm (0.173 in) deep.
- dShaft diameter (over – up to)
- 58–65 mm2.283–2.559 in2.283–2.559 in58–65 mm
- bWidth
- 18 mm0.709 in0.709 in18 mm
- t1Shaft keyway depth
- 7 mm0.276 in0.276 in7 mm
- t2Hub keyway depth
- 4.4 mm0.173 in0.173 in4.4 mm
Drawing
18 × 11 specifications
| dShaft diameter (over – up to) | 58–65 mm2.283–2.559 in |
|---|---|
| bWidth | 18 mm0.709 in |
| hHeight | 11 mm0.433 in |
| t1Shaft keyway depth | 7 mm0.276 in |
| t2Hub keyway depth | 4.4 mm0.173 in |
All Parallel Keys sizes
Sources
- DIN 6885-1:2021, Parallel keys, keyways, deep pattern: dimensions, tolerances, mass
- ANSI B17.1: Keys and keyseats (square and flat parallel keys)
- fasten.it: DIN 6885-1 dimension table
- Böllhoff: DIN 6885 steel parallel keys data sheet
- Gantner: DIN 6885 parallel keys
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.