4 × 4 Parallel Key and Keyway Dimensions

Parallel Keys · Metric: DIN 6885-1 form A / ISO 773

A 4 × 4 key (Metric: DIN 6885-1 form A / ISO 773) is used on shafts of 10–12 mm (0.394–0.472 in). The shaft keyway is 2.5 mm (0.098 in) deep and the hub keyway 1.8 mm (0.071 in) deep.

dShaft diameter (over – up to)
10–12 mm0.394–0.472 in0.394–0.472 in10–12 mm
bWidth
4 mm0.157 in0.157 in4 mm
t1Shaft keyway depth
2.5 mm0.098 in0.098 in2.5 mm
t2Hub keyway depth
1.8 mm0.071 in0.071 in1.8 mm

Drawing

b 4 mmb 0.157 int1 2.5 mmt1 0.098 int2 1.8 mmt2 0.071 in⌀11 mm⌀0.433 in
Shaft drawn at the middle of the key's shaft rangeDrawn to scale · Dimensions in mmDimensions in inches

4 × 4 specifications

dShaft diameter (over – up to)10–12 mm0.394–0.472 in
bWidth4 mm0.157 in
hHeight4 mm0.157 in
t1Shaft keyway depth2.5 mm0.098 in
t2Hub keyway depth1.8 mm0.071 in

All Parallel Keys sizes

Compare all 29 sizes in the Parallel Keys chart →

Sources

  1. DIN 6885-1:2021, Parallel keys, keyways, deep pattern: dimensions, tolerances, mass
  2. ANSI B17.1: Keys and keyseats (square and flat parallel keys)
  3. fasten.it: DIN 6885-1 dimension table
  4. Böllhoff: DIN 6885 steel parallel keys data sheet
  5. Gantner: DIN 6885 parallel keys

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.