5 × 5 Parallel Key and Keyway Dimensions

Parallel Keys · Metric: DIN 6885-1 form A / ISO 773

A 5 × 5 key (Metric: DIN 6885-1 form A / ISO 773) is used on shafts of 12–17 mm (0.472–0.669 in). The shaft keyway is 3 mm (0.118 in) deep and the hub keyway 2.3 mm (0.091 in) deep.

dShaft diameter (over – up to)
12–17 mm0.472–0.669 in0.472–0.669 in12–17 mm
bWidth
5 mm0.197 in0.197 in5 mm
t1Shaft keyway depth
3 mm0.118 in0.118 in3 mm
t2Hub keyway depth
2.3 mm0.091 in0.091 in2.3 mm

Drawing

b 5 mmb 0.197 int1 3 mmt1 0.118 int2 2.3 mmt2 0.091 in⌀14.5 mm⌀0.571 in
Shaft drawn at the middle of the key's shaft rangeDrawn to scale · Dimensions in mmDimensions in inches

5 × 5 specifications

dShaft diameter (over – up to)12–17 mm0.472–0.669 in
bWidth5 mm0.197 in
hHeight5 mm0.197 in
t1Shaft keyway depth3 mm0.118 in
t2Hub keyway depth2.3 mm0.091 in

All Parallel Keys sizes

Compare all 29 sizes in the Parallel Keys chart →

Sources

  1. DIN 6885-1:2021, Parallel keys, keyways, deep pattern: dimensions, tolerances, mass
  2. ANSI B17.1: Keys and keyseats (square and flat parallel keys)
  3. fasten.it: DIN 6885-1 dimension table
  4. Böllhoff: DIN 6885 steel parallel keys data sheet
  5. Gantner: DIN 6885 parallel keys

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.