6 × 6 Parallel Key and Keyway Dimensions

Parallel Keys · Metric: DIN 6885-1 form A / ISO 773

A 6 × 6 key (Metric: DIN 6885-1 form A / ISO 773) is used on shafts of 17–22 mm (0.669–0.866 in). The shaft keyway is 3.5 mm (0.138 in) deep and the hub keyway 2.8 mm (0.110 in) deep.

dShaft diameter (over – up to)
17–22 mm0.669–0.866 in0.669–0.866 in17–22 mm
bWidth
6 mm0.236 in0.236 in6 mm
t1Shaft keyway depth
3.5 mm0.138 in0.138 in3.5 mm
t2Hub keyway depth
2.8 mm0.110 in0.110 in2.8 mm

Drawing

b 6 mmb 0.236 int1 3.5 mmt1 0.138 int2 2.8 mmt2 0.110 in⌀19.5 mm⌀0.768 in
Shaft drawn at the middle of the key's shaft rangeDrawn to scale · Dimensions in mmDimensions in inches

6 × 6 specifications

dShaft diameter (over – up to)17–22 mm0.669–0.866 in
bWidth6 mm0.236 in
hHeight6 mm0.236 in
t1Shaft keyway depth3.5 mm0.138 in
t2Hub keyway depth2.8 mm0.110 in

All Parallel Keys sizes

Compare all 29 sizes in the Parallel Keys chart →

Sources

  1. DIN 6885-1:2021, Parallel keys, keyways, deep pattern: dimensions, tolerances, mass
  2. ANSI B17.1: Keys and keyseats (square and flat parallel keys)
  3. fasten.it: DIN 6885-1 dimension table
  4. Böllhoff: DIN 6885 steel parallel keys data sheet
  5. Gantner: DIN 6885 parallel keys

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.