1/2" square Parallel Key and Keyway Dimensions

Parallel Keys · Inch: ANSI B17.1 square keys

A 1/2" square key (ANSI B17.1) is used on shafts over 1-3/4 in up to 2-1/4 in. The keyseat is cut 0.25 in deep in both shaft and hub, half the key height.

dShaft diameter (over – up to)
44.45–57.15 mm1.750–2.250 in1.750–2.250 in44.45–57.15 mm
bWidth
12.7 mm1/2 in1/2 in12.7 mm
t1Shaft keyway depth
6.35 mm1/4 in1/4 in6.35 mm
t2Hub keyway depth
6.35 mm1/4 in1/4 in6.35 mm

Drawing

b 12.7 mmb 1/2 int1 6.35 mmt1 1/4 int2 6.35 mmt2 1/4 in⌀50.8 mm⌀2 in
Shaft at the middle of the range; keyseats at half the key height (ANSI B17.1)Drawn to scale · Dimensions in mmDimensions in inches

1/2" square specifications

dShaft diameter (over – up to)44.45–57.15 mm1.750–2.250 in
bWidth12.7 mm1/2 in
hHeight12.7 mm1/2 in
t1Shaft keyway depth6.35 mm1/4 in
t2Hub keyway depth6.35 mm1/4 in

All Parallel Keys sizes

Compare all 29 sizes in the Parallel Keys chart →

Sources

  1. DIN 6885-1:2021, Parallel keys, keyways, deep pattern: dimensions, tolerances, mass
  2. ANSI B17.1: Keys and keyseats (square and flat parallel keys)
  3. fasten.it: DIN 6885-1 dimension table
  4. Böllhoff: DIN 6885 steel parallel keys data sheet
  5. Gantner: DIN 6885 parallel keys

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.