3/8" square Parallel Key and Keyway Dimensions

Parallel Keys · Inch: ANSI B17.1 square keys

A 3/8" square key (ANSI B17.1) is used on shafts over 1-3/8 in up to 1-3/4 in. The keyseat is cut 0.1875 in deep in both shaft and hub, half the key height.

dShaft diameter (over – up to)
34.93–44.45 mm1.375–1.750 in1.375–1.750 in34.93–44.45 mm
bWidth
9.53 mm3/8 in3/8 in9.53 mm
t1Shaft keyway depth
4.76 mm3/16 in3/16 in4.76 mm
t2Hub keyway depth
4.76 mm3/16 in3/16 in4.76 mm

Drawing

b 9.53 mmb 3/8 int1 4.76 mmt1 3/16 int2 4.76 mmt2 3/16 in⌀39.69 mm⌀1 9/16 in
Shaft at the middle of the range; keyseats at half the key height (ANSI B17.1)Drawn to scale · Dimensions in mmDimensions in inches

3/8" square specifications

dShaft diameter (over – up to)34.93–44.45 mm1.375–1.750 in
bWidth9.53 mm3/8 in
hHeight9.53 mm3/8 in
t1Shaft keyway depth4.76 mm3/16 in
t2Hub keyway depth4.76 mm3/16 in

All Parallel Keys sizes

Compare all 29 sizes in the Parallel Keys chart →

Sources

  1. DIN 6885-1:2021, Parallel keys, keyways, deep pattern: dimensions, tolerances, mass
  2. ANSI B17.1: Keys and keyseats (square and flat parallel keys)
  3. fasten.it: DIN 6885-1 dimension table
  4. Böllhoff: DIN 6885 steel parallel keys data sheet
  5. Gantner: DIN 6885 parallel keys

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.