1/4" square Parallel Key and Keyway Dimensions

Parallel Keys · Inch: ANSI B17.1 square keys

A 1/4" square key (ANSI B17.1) is used on shafts over 7/8 in up to 1-1/4 in. The keyseat is cut 0.125 in deep in both shaft and hub, half the key height.

dShaft diameter (over – up to)
22.23–31.75 mm0.875–1.250 in0.875–1.250 in22.23–31.75 mm
bWidth
6.35 mm1/4 in1/4 in6.35 mm
t1Shaft keyway depth
3.18 mm1/8 in1/8 in3.18 mm
t2Hub keyway depth
3.18 mm1/8 in1/8 in3.18 mm

Drawing

b 6.35 mmb 1/4 int1 3.18 mmt1 1/8 int2 3.18 mmt2 1/8 in⌀26.99 mm⌀1 1/16 in
Shaft at the middle of the range; keyseats at half the key height (ANSI B17.1)Drawn to scale · Dimensions in mmDimensions in inches

1/4" square specifications

dShaft diameter (over – up to)22.23–31.75 mm0.875–1.250 in
bWidth6.35 mm1/4 in
hHeight6.35 mm1/4 in
t1Shaft keyway depth3.18 mm1/8 in
t2Hub keyway depth3.18 mm1/8 in

1/4 in square key: shafts over 7/8 in up to 1-1/4 in, including the common 1 in motor shaft. Keyseat depth 1/8 in in shaft and hub.

All Parallel Keys sizes

Compare all 29 sizes in the Parallel Keys chart →

Sources

  1. DIN 6885-1:2021, Parallel keys, keyways, deep pattern: dimensions, tolerances, mass
  2. ANSI B17.1: Keys and keyseats (square and flat parallel keys)
  3. fasten.it: DIN 6885-1 dimension table
  4. Böllhoff: DIN 6885 steel parallel keys data sheet
  5. Gantner: DIN 6885 parallel keys

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.