3/16" square Parallel Key and Keyway Dimensions

Parallel Keys · Inch: ANSI B17.1 square keys

A 3/16" square key (ANSI B17.1) is used on shafts over 9/16 in up to 7/8 in. The keyseat is cut 0.0938 in deep in both shaft and hub, half the key height.

dShaft diameter (over – up to)
14.29–22.23 mm0.563–0.875 in0.563–0.875 in14.29–22.23 mm
bWidth
4.76 mm3/16 in3/16 in4.76 mm
t1Shaft keyway depth
2.38 mm3/32 in3/32 in2.38 mm
t2Hub keyway depth
2.38 mm3/32 in3/32 in2.38 mm

Drawing

b 4.76 mmb 3/16 int1 2.38 mmt1 3/32 int2 2.38 mmt2 3/32 in⌀18.26 mm⌀23/32 in
Shaft at the middle of the range; keyseats at half the key height (ANSI B17.1)Drawn to scale · Dimensions in mmDimensions in inches

3/16" square specifications

dShaft diameter (over – up to)14.29–22.23 mm0.563–0.875 in
bWidth4.76 mm3/16 in
hHeight4.76 mm3/16 in
t1Shaft keyway depth2.38 mm3/32 in
t2Hub keyway depth2.38 mm3/32 in

All Parallel Keys sizes

Compare all 29 sizes in the Parallel Keys chart →

Sources

  1. DIN 6885-1:2021, Parallel keys, keyways, deep pattern: dimensions, tolerances, mass
  2. ANSI B17.1: Keys and keyseats (square and flat parallel keys)
  3. fasten.it: DIN 6885-1 dimension table
  4. Böllhoff: DIN 6885 steel parallel keys data sheet
  5. Gantner: DIN 6885 parallel keys

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.