5/16" square Parallel Key and Keyway Dimensions

Parallel Keys · Inch: ANSI B17.1 square keys

A 5/16" square key (ANSI B17.1) is used on shafts over 1-1/4 in up to 1-3/8 in. The keyseat is cut 0.1563 in deep in both shaft and hub, half the key height.

dShaft diameter (over – up to)
31.75–34.93 mm1.250–1.375 in1.250–1.375 in31.75–34.93 mm
bWidth
7.94 mm5/16 in5/16 in7.94 mm
t1Shaft keyway depth
3.97 mm5/32 in5/32 in3.97 mm
t2Hub keyway depth
3.97 mm5/32 in5/32 in3.97 mm

Drawing

b 7.94 mmb 5/16 int1 3.97 mmt1 5/32 int2 3.97 mmt2 5/32 in⌀33.34 mm⌀1 5/16 in
Shaft at the middle of the range; keyseats at half the key height (ANSI B17.1)Drawn to scale · Dimensions in mmDimensions in inches

5/16" square specifications

dShaft diameter (over – up to)31.75–34.93 mm1.250–1.375 in
bWidth7.94 mm5/16 in
hHeight7.94 mm5/16 in
t1Shaft keyway depth3.97 mm5/32 in
t2Hub keyway depth3.97 mm5/32 in

All Parallel Keys sizes

Compare all 29 sizes in the Parallel Keys chart →

Sources

  1. DIN 6885-1:2021, Parallel keys, keyways, deep pattern: dimensions, tolerances, mass
  2. ANSI B17.1: Keys and keyseats (square and flat parallel keys)
  3. fasten.it: DIN 6885-1 dimension table
  4. Böllhoff: DIN 6885 steel parallel keys data sheet
  5. Gantner: DIN 6885 parallel keys

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.