1" square Parallel Key and Keyway Dimensions

Parallel Keys · Inch: ANSI B17.1 square keys

A 1" square key (ANSI B17.1) is used on shafts over 3-3/4 in up to 4-1/2 in. The keyseat is cut 0.5 in deep in both shaft and hub, half the key height.

dShaft diameter (over – up to)
95.25–114.3 mm3.750–4.500 in3.750–4.500 in95.25–114.3 mm
bWidth
25.4 mm1 in1 in25.4 mm
t1Shaft keyway depth
12.7 mm1/2 in1/2 in12.7 mm
t2Hub keyway depth
12.7 mm1/2 in1/2 in12.7 mm

Drawing

b 25.4 mmb 1 int1 12.7 mmt1 1/2 int2 12.7 mmt2 1/2 in⌀104.78 mm⌀4 1/8 in
Shaft at the middle of the range; keyseats at half the key height (ANSI B17.1)Drawn to scale · Dimensions in mmDimensions in inches

1" square specifications

dShaft diameter (over – up to)95.25–114.3 mm3.750–4.500 in
bWidth25.4 mm1 in
hHeight25.4 mm1 in
t1Shaft keyway depth12.7 mm1/2 in
t2Hub keyway depth12.7 mm1/2 in

All Parallel Keys sizes

Compare all 29 sizes in the Parallel Keys chart →

Sources

  1. DIN 6885-1:2021, Parallel keys, keyways, deep pattern: dimensions, tolerances, mass
  2. ANSI B17.1: Keys and keyseats (square and flat parallel keys)
  3. fasten.it: DIN 6885-1 dimension table
  4. Böllhoff: DIN 6885 steel parallel keys data sheet
  5. Gantner: DIN 6885 parallel keys

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.