3/4" square Parallel Key and Keyway Dimensions

Parallel Keys · Inch: ANSI B17.1 square keys

A 3/4" square key (ANSI B17.1) is used on shafts over 2-3/4 in up to 3-1/4 in. The keyseat is cut 0.375 in deep in both shaft and hub, half the key height.

dShaft diameter (over – up to)
69.85–82.55 mm2.750–3.250 in2.750–3.250 in69.85–82.55 mm
bWidth
19.05 mm3/4 in3/4 in19.05 mm
t1Shaft keyway depth
9.53 mm3/8 in3/8 in9.53 mm
t2Hub keyway depth
9.53 mm3/8 in3/8 in9.53 mm

Drawing

b 19.05 mmb 3/4 int1 9.53 mmt1 3/8 int2 9.53 mmt2 3/8 in⌀76.2 mm⌀3 in
Shaft at the middle of the range; keyseats at half the key height (ANSI B17.1)Drawn to scale · Dimensions in mmDimensions in inches

3/4" square specifications

dShaft diameter (over – up to)69.85–82.55 mm2.750–3.250 in
bWidth19.05 mm3/4 in
hHeight19.05 mm3/4 in
t1Shaft keyway depth9.53 mm3/8 in
t2Hub keyway depth9.53 mm3/8 in

All Parallel Keys sizes

Compare all 29 sizes in the Parallel Keys chart →

Sources

  1. DIN 6885-1:2021, Parallel keys, keyways, deep pattern: dimensions, tolerances, mass
  2. ANSI B17.1: Keys and keyseats (square and flat parallel keys)
  3. fasten.it: DIN 6885-1 dimension table
  4. Böllhoff: DIN 6885 steel parallel keys data sheet
  5. Gantner: DIN 6885 parallel keys

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.