Motherboard and PSU Form Factors: ATX, Micro-ATX, Mini-ITX, SFX

The form factor fixes a motherboard's maximum size and mounting holes, so any compliant board fits any compliant case. The three common sizes are ATX 305 × 244 mm (12 × 9.6 in), Micro-ATX 244 × 244 mm (9.6 × 9.6 in) and Mini-ITX 170 × 170 mm (6.7 × 6.7 in); an ATX case takes all three. Power supplies have their own form factors: ATX for full-size cases, SFX and SFX-L for small builds.

17 sizesChecked 2026-11-155 sources
E-ATX 305 × 330 mm down to Pico-ITX 100 × 72 mm; ATX highlighted.Drawn to scale

Size chartTap a size for its drawing and full specs

17 of 17
Form factorWWidthmminDDepthmminHHeightmminExpansion slots (max.)Mounting holes
ATX family motherboards
ATX30512.012449.61—79
Micro-ATX2449.612449.61—4—
Flex-ATX2299.021917.52—3—
E-ATX30512.0133012.99—7—
Small motherboards (ITX and DTX)
DTX2449.612037.99—2—
Mini-DTX2037.991706.69—2—
Mini-ITX1706.691706.69—14
Thin Mini-ITX1706.691706.69——4
Nano-ITX1204.721204.72———
Pico-ITX1003.94722.83———
Server and workstation motherboards (SSI)
SSI CEB30512.0126710.51—7—
SSI EEB30512.0133012.99—7—
Power supplies
ATX power supply1505.911405.51863.39——
SFX power supply1254.921003.9463.52.50——
SFX-L power supply1254.921305.1263.52.50——
TFX power supply853.351756.89652.56——
Flex ATX power supply81.53.211505.9140.51.59——

How motherboard sizes fit together

Board sizes are maximums. A Micro-ATX board may be narrower than 244 mm, and many "ATX" boards are a little shallower than 244 mm. What does not change is the position of the rear I/O panel and the mounting holes: smaller ATX-family boards use a subset of the ATX hole positions, and Mini-ITX's four holes line up with four ATX holes. That is why a Mini-ITX board screws straight into an ATX case.

A case is sold by the largest board it takes. An ATX case takes ATX, Micro-ATX and Mini-ITX; a Micro-ATX case takes Micro-ATX and Mini-ITX; an E-ATX case usually takes everything up to 305 × 330 mm. The number of rear expansion slots in the case limits how many cards you can install, not which board fits.

Power supplies are measured width × height × depth. ATX PSUs are 150 × 86 mm at the back; the depth starts at 140 mm and often grows with wattage (160 and 180 mm are common), so check the case's PSU clearance. SFX units are 125 × 63.5 × 100 mm, and SFX-L adds 30 mm of depth for a larger, quieter fan. Most ATX cases accept an SFX PSU with an adapter bracket.

About PC Form Factors

ATX was introduced by Intel in 1995 and still defines the mid-tower PC: a 12 × 9.6 in (305 × 244 mm) board with up to seven expansion slots and nine mounting holes. Micro-ATX keeps the 9.6 in dimension and shortens the 12 in side to 9.6 in, which leaves room for up to four slots. Mini-ITX, created by VIA and later added to the microATX specification, is 170 × 170 mm with one slot.

E-ATX has no official specification. Most E-ATX boards are 305 × 330 mm (12 × 13 in), the same outline as the SSI EEB server standard, but some boards sold as E-ATX are only 305 × 257 to 277 mm. Check the board's actual depth against the case's maximum. Larger vendor formats such as XL-ATX differ between makers and are not standardised at all.

Below Mini-ITX are embedded formats: Nano-ITX (120 × 120 mm) and Pico-ITX (100 × 72 mm). They do not define a common mounting or I/O layout the way ATX does, so cases and enclosures are usually specific to a board family. Thin Mini-ITX keeps the 170 × 170 mm outline but limits the height of components on the board, for all-in-one PCs and slim cases.

Server boards: SSI CEB and EEB

The Server System Infrastructure forum defines two larger boards for dual-socket servers and workstations. SSI CEB is 305 × 267 mm (12 × 10.5 in) and uses the same mounting holes and I/O area as ATX. SSI EEB is 305 × 330 mm (12 × 13 in), with mounting holes that differ from ATX in places. A case that lists "E-ATX" support does not necessarily have every EEB standoff position.

Choosing a PSU form factor

ATX is the default for any case with room: it is usually the cheapest per watt and, with a 120 or 140 mm fan, the quietest at a given load. SFX and SFX-L are for small-form-factor cases; SFX-L needs 130 mm of depth instead of 100 mm. TFX (85 × 65 × 175 mm) and Flex ATX (81.5 × 40.5 × 150 mm) are long, narrow units used in slim office desktops and some mini-ITX cases, at low to moderate wattages.

Questions

What size is an ATX motherboard?

12 × 9.6 in, or 305 × 244 mm. ATX allows up to seven expansion slots and has up to nine mounting holes.

Will a Micro-ATX motherboard fit in an ATX case?

Yes. Micro-ATX (244 × 244 mm) uses a subset of the ATX mounting holes and the same rear I/O position. Mini-ITX also fits ATX and Micro-ATX cases.

What is the difference between ATX and E-ATX?

E-ATX boards are deeper: usually 305 × 330 mm instead of 305 × 244 mm, with room for more memory slots and VRM. E-ATX is not a formal standard, so check the board's exact depth against the case.

How big is a Mini-ITX motherboard?

170 × 170 mm (6.7 × 6.7 in), with one expansion slot (usually for a graphics card) and four mounting holes.

What are the dimensions of an ATX power supply?

150 mm wide, 86 mm high and at least 140 mm deep. Many units are 160 or 180 mm deep, so check the case's maximum PSU length.

What is the difference between SFX and SFX-L?

Both are 125 × 63.5 mm at the back. SFX is 100 mm deep; SFX-L is 130 mm deep, which allows a 120 mm fan instead of a 92 mm one. Check that the case has room for the extra 30 mm.

Sources

  1. Intel: ATX Specification 2.2 and microATX Motherboard Interface Specification 1.2 (incl. Mini-ITX and FlexATX)
  2. Intel: Thin Mini-ITX based PC system design guide (board height limit)
  3. SSI Forum: EEB and CEB specifications (305 × 330 and 305 × 267 mm server boards)
  4. Corsair: Power supply form factors and sizes explained (ATX, SFX, SFX-L)
  5. Intel: TFX12V and SFX12V power supply design guides

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.