NPS 1/2 Butt-Weld Fitting Dimensions
Butt-Weld Fittings
For NPS 1/2 butt-weld fittings (pipe OD 0.840 in / 21.3 mm): a 90° long-radius elbow is 1.50 in (38.1 mm) centre to end, a 45° elbow 0.62 in (15.7 mm), and a straight tee 1.00 in (25.4 mm) centre to end of run and outlet. The values come from ASME B16.9 and are the same for every schedule.
- A90° elbow, long radius (centre to end)
- 38.1 mm1.50 in1.50 in38.1 mm
- B45° elbow, long radius (centre to end)
- 15.7 mm0.62 in0.62 in15.7 mm
- CTee, centre to end of run
- 25.4 mm1.00 in1.00 in25.4 mm
Drawing
NPS 1/2 specifications
| DN (metric nominal) | 15 |
|---|---|
| ODPipe outside diameter | 0.840 in21.3 mm |
| A90° elbow, long radius (centre to end) | 1.50 in38.1 mm |
| B45° elbow, long radius (centre to end) | 0.62 in15.7 mm |
| CTee, centre to end of run | 1.00 in25.4 mm |
| MTee, centre to end of outlet | 1.00 in25.4 mm |
| ECap length (standard wall) | 1.00 in25.4 mm |
| E₁Cap length (heavy wall) | 1.00 in25.4 mm |
B16.9 makes no short-radius elbows below NPS 1 and no reducers with a 1/2" large end; the smallest reducer is 3/4 × 1/2 (H = 1.50"). Note the long-radius elbow is 1.50", the same as NPS 1, not 1.5 × 1/2.
Pipe of this size
Flanges of this size
All Butt-Weld Fittings sizes
Sources
- ASME B16.9-2018: Factory-Made Wrought Buttwelding Fittings
- ASME B16.9-2003 (incorporated by reference, public copy): law.resource.org
- pipedata.org: Straight tee, concentric reducer and cap dimensions, ASME B16.9
- Ferrobend: ANSI/ASME B16.9 fitting dimension tables (mm)
- pipingengineer.org: Butt weld cap inch dimensions per ASME B16.9
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.