NPS 1/2 Pipe Dimensions (DN 15)

Pipe Sizes

NPS 1/2 (DN 15) steel pipe has an outside diameter of 0.840 in (21.3 mm) in every schedule. In Schedule 40 the wall is 0.109 in (2.77 mm), giving an inside diameter of 0.622 in (15.80 mm); in Schedule 80 the wall is 0.147 in (3.73 mm) and the ID 0.546 in (13.87 mm).

ODOutside diameter
21.3 mm0.840 in0.840 in21.3 mm
IDInside diameter, SCH 40
15.80 mm0.622 in0.622 in15.80 mm
tWall, SCH 40
2.77 mm0.109 in0.109 in2.77 mm
Weight, SCH 40
1.26 kg/m0.85 lb/ft0.85 lb/ft1.26 kg/m

Drawing

⌀21.3 mm⌀0.840 in⌀15.8 mm⌀0.622 int = 2.77 mmt = 0.109 inSection shown: SCH 40
Wall by schedule (enlarged)5S1.65 mm0.065 in10S2.11 mm0.083 in402.77 mm0.109 in803.73 mm0.147 in1604.78 mm0.188 inXXS7.47 mm0.294 in
Hatched ring: SCH 40 wall; dashed circle: SCH 80 bore. Bar view: every wall defined for this size, enlarged to one scale.Drawn to scale · Dimensions in mmDimensions in inches

NPS 1/2 specifications

DN (metric nominal)15
ODOutside diameter0.840 in21.3 mm
tWall, SCH 5S0.065 in1.65 mm
tWall, SCH 10S0.083 in2.11 mm
tWall, SCH 400.109 in2.77 mm
tWall, STD0.109 in2.77 mm
tWall, SCH 800.147 in3.73 mm
tWall, XS (extra strong)0.147 in3.73 mm
tWall, SCH 1600.188 in4.78 mm
tWall, XXS0.294 in7.47 mm
IDInside diameter, SCH 5S0.710 in18.03 mm
IDInside diameter, SCH 10S0.674 in17.12 mm
IDInside diameter, SCH 400.622 in15.80 mm
IDInside diameter, SCH 800.546 in13.87 mm
IDInside diameter, SCH 1600.464 in11.79 mm
IDInside diameter, XXS0.252 in6.40 mm
Weight, SCH 400.85 lb/ft1.26 kg/m
Weight, SCH 801.09 lb/ft1.62 kg/m

Half-inch pipe is 0.840 in (21.3 mm) outside, about 7/8 in, not 1/2 in. Its NPT thread is 1/2-14.

Also known as

DN151/2"15A

Pipe thread for NPS 1/2

All Pipe Sizes sizes

Compare all 23 sizes in the Pipe Sizes chart →

Sources

  1. ASME B36.10M: Welded and Seamless Wrought Steel Pipe
  2. ASME B36.19M: Stainless Steel Pipe
  3. Engineers Edge: Schedule 40 steel pipe sizes (ASME/ANSI B36.10/19)
  4. Project Materials: ASME B36.10 / B36.19 pipe dimension charts

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.