NPS 12 Butt-Weld Fitting Dimensions

Butt-Weld Fittings

For NPS 12 butt-weld fittings (pipe OD 12.750 in / 323.8 mm): a 90° long-radius elbow is 18.00 in (457.2 mm) centre to end, a 45° elbow 7.50 in (190.5 mm), and a straight tee 10.00 in (254.0 mm) centre to end of run and outlet. The values come from ASME B16.9 and are the same for every schedule.

A90° elbow, long radius (centre to end)
457.2 mm18.00 in18.00 in457.2 mm
B45° elbow, long radius (centre to end)
190.5 mm7.50 in7.50 in190.5 mm
CTee, centre to end of run
254.0 mm10.00 in10.00 in254.0 mm
HReducer, end to end
203.2 mm8.00 in8.00 in203.2 mm

Drawing

457.2 mm18.00 in457.2 mm18.00 in⌀323.8 mm⌀12.750 in
254.0 mm10.00 in254.0 mm10.00 in254.0 mm10.00 in
90° long-radius elbow (centre to end A) and straight tee (run C = outlet M).Drawn to scale · Dimensions in mmDimensions in inches

NPS 12 specifications

DN (metric nominal)300
ODPipe outside diameter12.750 in323.8 mm
A90° elbow, long radius (centre to end)18.00 in457.2 mm
A90° elbow, short radius (centre to end)12.00 in304.8 mm
B45° elbow, long radius (centre to end)7.50 in190.5 mm
CTee, centre to end of run10.00 in254.0 mm
MTee, centre to end of outlet10.00 in254.0 mm
HReducer, end to end8.00 in203.2 mm
ECap length (standard wall)6.00 in152.4 mm
E₁Cap length (heavy wall)7.00 in177.8 mm

Pipe of this size

Flanges of this size

All Butt-Weld Fittings sizes

Compare all 20 sizes in the Butt-Weld Fittings chart →

Sources

  1. ASME B16.9-2018: Factory-Made Wrought Buttwelding Fittings
  2. ASME B16.9-2003 (incorporated by reference, public copy): law.resource.org
  3. pipedata.org: Straight tee, concentric reducer and cap dimensions, ASME B16.9
  4. Ferrobend: ANSI/ASME B16.9 fitting dimension tables (mm)
  5. pipingengineer.org: Butt weld cap inch dimensions per ASME B16.9

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.